Do you think I could re use this center iron?

David Jerome · 07-28-2009, 12:09 PM

Phil, what caused that scratch? To answer your question as long as it isnt a high spot you can run it, may not be ideal but it will run. You see very slight difference in compression on used irons unless they are just extremely worn. I dont remember the clearances on the renesis but they have a much larger clearance from the factory than the 13b. Landers has a good bit of experience with these engines and I am sure he can chime in.

07-28-2009, 12:09 PM	#1
David Jerome RCC Contributor Join Date: Jan 2008 Posts: 713 Rep Power: 18	Phil, what caused that scratch? To answer your question as long as it isnt a high spot you can run it, may not be ideal but it will run. You see very slight difference in compression on used irons unless they are just extremely worn. I dont remember the clearances on the renesis but they have a much larger clearance from the factory than the 13b. Landers has a good bit of experience with these engines and I am sure he can chime in.