Going to start building my car looking for input

rx7mechusa · 07-28-2009, 12:21 AM

Been looking on the A-Spec fourm on the other site and it seems i can get my 300hp to the wheels at about 12psi so im going to probably have it tuned to get something like that out of the car. 12psi on a rebuild T2 motor dosent seem that bad to me. going to work out what im going to put on the car and post it up in a lil bit. Do you think the stock FPR can handle this on the A-Spec site the car that was actually running that tune still was using the stock one that safe or should i consider upgrading it here since im working on the fuel system anyways.

RETed · 07-28-2009, 01:40 AM

Stock FPR is good to 400hp - that's my rule of thumb.
I don't change it out until you start getting to 500hp - that's my rule of thumb.

-Ted

07-28-2009, 12:21 AM	#1
rx7mechusa no no come on start plz?! Join Date: Jul 2009 Location: FT. Campbell Posts: 56 Rep Power: 16	Been looking on the A-Spec fourm on the other site and it seems i can get my 300hp to the wheels at about 12psi so im going to probably have it tuned to get something like that out of the car. 12psi on a rebuild T2 motor dosent seem that bad to me. going to work out what im going to put on the car and post it up in a lil bit. Do you think the stock FPR can handle this on the A-Spec site the car that was actually running that tune still was using the stock one that safe or should i consider upgrading it here since im working on the fuel system anyways. __________________ US ARMY-OH 58D(R) Helicopter Mechanic Cars- 1988 10th AE 1993 Nissan Pathfinder (off road fun truck) 1999 GMC Suburban (10thAE personal transportation)