.Want to wire FD TPS onto the FC wiring.(how?).

TehMonkay · 06-07-2009, 03:23 PM

FC ecu does not use a full range tps for anything other than MOP operation on the S5, and the TPS on the fd is full range. I'd guess you're not going to have alot of luck with it though it MIGHT work if the ohm range is the same between the two which you could test for with a DMM or check in the FSM.

As for wiring, you'll need to look that up in the fsm as well. Just match up the wires, one is +5v, one is ground, one is for the sensor output.

06-07-2009, 03:23 PM	#1
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY Posts: 302 Rep Power: 18	FC ecu does not use a full range tps for anything other than MOP operation on the S5, and the TPS on the fd is full range. I'd guess you're not going to have alot of luck with it though it MIGHT work if the ohm range is the same between the two which you could test for with a DMM or check in the FSM. As for wiring, you'll need to look that up in the fsm as well. Just match up the wires, one is +5v, one is ground, one is for the sensor output. __________________ My car blows up everytime I start it, it's rotary