TX-San Antonio Parting several SA/FBs - Page 2

Rotarydave · 03-11-2009, 10:04 AM

Quote:

Originally Posted by RX-7 Chris

Yes it is the standard 84-5 spindles and dust covers that I need, not the SE.

I also was looking and I need the spindle nuts, retainers, and washers.

I just have to clean the other stuff off the parts you are looking at 50$ total plus shipping which was a guess at 25$ UPS ground I will firm up that quote for you but it will take a couple of days as we are scattered across the country right now

RX-7 Chris · 03-11-2009, 10:14 AM

I added the dust covers (or caps, whatever they are called) that go over the bearings as well if that is ok. Does that change the price?

I will take it either way. Do you take paypal or something else? I will PM you my info.

Rotarydave · 03-11-2009, 10:25 AM

If i am correct you need the tube/spindle 84-5 with all spindle hardware, dustcaps and backing plates correct?

So i will be removing the struts, springs, rotors, and calipers.

If that is good I am sure that I can do it for a total of 75$ shipping included paypal is rotarydave@aol.com, parts will be going out on Wed please include good shipping address

RX-7 Chris · 03-11-2009, 10:38 AM

That is correct

I sent the payment with the address. PM me if there is anything else you need.

ROTOSPEED · 03-11-2009, 11:14 PM

do you have a stock wing

P71 · 03-12-2009, 12:04 AM

Dave,
I need the following, all for an 83 GSL:
Set of power window switches
Heat/A/C control unit (manual one with the sliders and knob)
Passenger headlight motor with good splines and a good arm with nylon washers still
Passenger headlight door/cover/lid thing
Header panel (metal panel between the lights)
Front bumper cover
Any kind of front spoiler (I need a picture first, looking for function over form)

It would be shipped to WA 98626 so obviously the header panel and front bumper are highly dependent on price/shipping.

Rotarydave · 03-12-2009, 12:16 AM

Quote:

Originally Posted by ROTOSPEED

do you have a stock wing

I need more info on the wing you are looking for there are a few different versions of wings that are out there.

Rotarydave · 03-12-2009, 12:21 AM

I need the following, all for an 83 GSL:
Set of power window switches (got some but I need to rehab them and check to make sure they are good)
Heat/A/C control unit (manual one with the sliders and knob) (got plenty no problem)
Passenger headlight motor with good splines and a good arm with nylon washers still (Got the motor don't know about the arm do you need both or which one short or long)
Passenger headlight door/cover/lid thing (What color do you prefer)
Header panel (might be easier and cheaper for me to find you one in WA)
Front bumper cover (Same as above)
Any kind of front spoiler (don't have any aftermarket ft spoilers just stock)

Give me a couple of days to complete this list with conditions and a price
DAVE

P71 · 03-12-2009, 08:16 AM

Dave,
My passenger motor works but the splines are worn away so the motor spins but the short arm with the ball stays still. The long arm that goes from the ball on the motor to the headlight has no bushings so that's the arm I need. I prefer a Sunset Red Metallic lid but I'll take any color.
My header panel and front bumper are OK, they just need some bodywork so I figured I might try and find some better ones so I'll have less bodywork to do.

ROTOSPEED · 03-13-2009, 12:40 AM

Quote:

Originally Posted by Rotarydave

I need more info on the wing you are looking for there are a few different versions of wings that are out there.

i dont know yet witch ones do you have?

Viperx7 · 03-20-2009, 08:29 PM

I need a few things for an 85 GS.
I need a dust cover for the front wheel bearings.
The fuel door opener button/switch.
Passenger side mirror(power).
Exterior door handle.
All of the hardware for wiper arm studs. The nuts, spacers and covers. Especially the 2 big nuts that hold the studs through the cowl and body. That make any sense?
It all would be shipped to 40475.
Thanks

BlkNBluRX7 · 03-30-2009, 11:50 AM

I need a small flange drive shaft for my early 83 GSL rear

theoneistrue · 04-13-2009, 12:14 PM

i was wondering if you had the plastic pieces that cover the steering column
for an '85 fb

RX-7 Chris · 04-15-2009, 09:15 AM

Dave, any updates on my parts it has been a month?

RX-7 Chris · 04-24-2009, 10:18 AM

My parts came in and they are exactly what I needed, thanks. Also thank your wife for me for sending them out.

03-12-2009, 12:04 AM	#21
P71 RCC Contributor Join Date: Feb 2008 Location: WA State Posts: 651 Rep Power: 18	Dave, I need the following, all for an 83 GSL: Set of power window switches Heat/A/C control unit (manual one with the sliders and knob) Passenger headlight motor with good splines and a good arm with nylon washers still Passenger headlight door/cover/lid thing Header panel (metal panel between the lights) Front bumper cover Any kind of front spoiler (I need a picture first, looking for function over form) It would be shipped to WA 98626 so obviously the header panel and front bumper are highly dependent on price/shipping. __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

03-12-2009, 12:21 AM	#23
Rotarydave Rotary Nut Case Join Date: Jan 2009 Location: Cibolo, TX Posts: 273 Rep Power: 17	Parts for P71 I need the following, all for an 83 GSL: Set of power window switches (got some but I need to rehab them and check to make sure they are good) Heat/A/C control unit (manual one with the sliders and knob) (got plenty no problem) Passenger headlight motor with good splines and a good arm with nylon washers still (Got the motor don't know about the arm do you need both or which one short or long) Passenger headlight door/cover/lid thing (What color do you prefer) Header panel (might be easier and cheaper for me to find you one in WA) Front bumper cover (Same as above) Any kind of front spoiler (don't have any aftermarket ft spoilers just stock) Give me a couple of days to complete this list with conditions and a price DAVE

03-12-2009, 08:16 AM	#24
P71 RCC Contributor Join Date: Feb 2008 Location: WA State Posts: 651 Rep Power: 18	Dave, My passenger motor works but the splines are worn away so the motor spins but the short arm with the ball stays still. The long arm that goes from the ball on the motor to the headlight has no bushings so that's the arm I need. I prefer a Sunset Red Metallic lid but I'll take any color. My header panel and front bumper are OK, they just need some bodywork so I figured I might try and find some better ones so I'll have less bodywork to do. __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

03-20-2009, 08:29 PM	#26
Viperx7 Rotary Fanatic Join Date: Feb 2008 Location: Richmond, KY Posts: 322 Rep Power: 18	I need a few things for an 85 GS. I need a dust cover for the front wheel bearings. The fuel door opener button/switch. Passenger side mirror(power). Exterior door handle. All of the hardware for wiper arm studs. The nuts, spacers and covers. Especially the 2 big nuts that hold the studs through the cowl and body. That make any sense? It all would be shipped to 40475. Thanks __________________ Mike Chrisman 83 Rx7 Turbo 85 Rx7 GS 89 Rx7 GTU http://www.cardomain.com/ride/409797 "Don't apoligize for being Patriotic, F**k 'em. TK"

03-30-2009, 11:50 AM	#27
BlkNBluRX7 I NEED PARTS!! Join Date: Jan 2009 Posts: 20 Rep Power: 0	I need a small flange drive shaft for my early 83 GSL rear __________________ 1985 GS "UNNAMED" 1983 GSL "THE TURD" 2008 Honda Fit JDM TYTE YO!!

03-11-2009, 10:14 AM	#17
RX-7 Chris Rotary Fanatic Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 132 Rep Power: 18	I added the dust covers (or caps, whatever they are called) that go over the bearings as well if that is ok. Does that change the price? I will take it either way. Do you take paypal or something else? I will PM you my info.

03-11-2009, 10:25 AM	#18
Rotarydave Rotary Nut Case Join Date: Jan 2009 Location: Cibolo, TX Posts: 273 Rep Power: 17	If i am correct you need the tube/spindle 84-5 with all spindle hardware, dustcaps and backing plates correct? So i will be removing the struts, springs, rotors, and calipers. If that is good I am sure that I can do it for a total of 75$ shipping included paypal is rotarydave@aol.com, parts will be going out on Wed please include good shipping address

03-11-2009, 10:38 AM	#19
RX-7 Chris Rotary Fanatic Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 132 Rep Power: 18	That is correct I sent the payment with the address. PM me if there is anything else you need.

03-11-2009, 11:14 PM	#20
ROTOSPEED The Newbie Join Date: Mar 2008 Location: peoria Posts: 20 Rep Power: 0	do you have a stock wing

04-13-2009, 12:14 PM	#28
theoneistrue The Newbie Join Date: Apr 2009 Posts: 3 Rep Power: 0	i was wondering if you had the plastic pieces that cover the steering column for an '85 fb

04-15-2009, 09:15 AM	#29
RX-7 Chris Rotary Fanatic Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 132 Rep Power: 18	Dave, any updates on my parts it has been a month?

04-24-2009, 10:18 AM	#30
RX-7 Chris Rotary Fanatic Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 132 Rep Power: 18	My parts came in and they are exactly what I needed, thanks. Also thank your wife for me for sending them out.