Clutch Woes

***TitaniumTT*** · 03-26-2009, 11:02 PM

I doubt it's the hydraulics. I would first
remove the clutch master and make sure there is no binding on the pedal assembly. A bushing may be worn
Next I would re-install the master and make sure that the rod is adjusted properly
After that, I would have to assume that the release bearing is binding on the shaft. That would be the worst thing that could happen though as it would require the removal of the transmission entirely.

03-26-2009, 11:02 PM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I doubt it's the hydraulics. I would first remove the clutch master and make sure there is no binding on the pedal assembly. A bushing may be worn Next I would re-install the master and make sure that the rod is adjusted properly After that, I would have to assume that the release bearing is binding on the shaft. That would be the worst thing that could happen though as it would require the removal of the transmission entirely.