|
Rotaryshack www.rotaryshack.com (CA) Specializing in carbs, custom turbo kits, 1gen rx7 parts |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Rotary Fanatic
|
![]()
--------------------------------------------------------------------------------
The carbon hoods are a 2 piece design that has a carbon top, next, hardware installed(for stock hood hinges and latch) then a liner is installed to make the hood rigid. It's a solid unit that you don't have to worry about it flying off your car the gel coat has UV additive to keep it from discoloring. Adding a few coats of clear is recommended for added protection and a even deeper shine. The weight of the hood is 15 pounds v.s. the stock hood weighing in at 40 pounds. The fiberglass units don't have hardware so you will need hood pins to attach it to your car. The fiberglass in it does have a hood liner for added strength like the carbon hood. This Hood weighs in at 15 pounds v.s. the stock hood weight of 40 pounds. ****** for an added cost the fiberglass hood can be fitted with the factory mounting hardware*****
__________________
![]() ![]() ![]() rotaryshack.com Last edited by 730RWHP12A; 03-06-2009 at 04:06 PM.. |
![]() |
![]() |
![]() |
#3 | |
Mod With The Least :P
|
![]()
Do I even wanna know what this beauty runs?
__________________
Resident Post Whore Polluting the environment one revolution at a time. ![]() www.tennspeed.net Quote:
|
|
![]() |
![]() |
![]() |
#5 |
Respecognize!
|
![]()
so like over 1000 kind of deal? Im surprised no one makes these state side.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#7 |
Respecognize!
|
![]()
whats the guess on shipping then?
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#9 |
Rotary Fanatic
|
![]() since these are a new item,shipping prices are unknown. i know usps wont ship them as they are too big, ups scares me because the destroy anything they can. im going to check on freight shipping and see if thats possibility as thats the method i currently use to ship motors/trannys with good results.
__________________
![]() ![]() ![]() rotaryshack.com |
![]() |
![]() |