installing EBC, boost solenoid question

13bt · 02-17-2009, 05:38 PM

well im installing my greddy profec b II and had a question about the boost solenoid. where is it located on the car?

the car is a 89 TII / stock turbo/ and external wastegate.

classicauto · 02-17-2009, 05:47 PM

Its located within the box of parts your Profec should come with!

13bt · 02-17-2009, 06:09 PM

oh you mean the black thing that says valve with NO, NC, and COM ports i have that...i meant the stock one.

TehMonkay · 02-17-2009, 06:24 PM

shouldn't matter, hook the greddy one directly to the wastegate actuator and directly to the port on the turbo for pressure reference.

classicauto · 02-18-2009, 11:04 AM

Quote:

Originally Posted by 13bt

oh you mean the black thing that says valve with NO, NC, and COM ports i have that...i meant the stock one.

There is no boost control sloenoid stock. The wastegate runs off pressure from the turbo and thats it.

The boost controller you're adding modifies the (pressure) signal between the turbo and wastegate, and thats how it controls boost.

Flooder · 02-18-2009, 01:17 PM

There's a pressure sensor on the passenger side strut tower, if that's what you're asking.

13bt · 02-18-2009, 04:11 PM

nah i wasn't talking about the pressure sensor. thanks though...everyone else also. was reading the instructions and it was talking about capping the solenoid off.

well anyway i have the unit hooked up. one more question, i have the hose from the turbo going into the NC port and the the wastegate line going into the COM port what about the port with NO on it.. do i plug it at all?

02-17-2009, 05:38 PM	#1
13bt The Newbie Join Date: Feb 2008 Location: Florida iTrader: (0) Posts: 18 Rep Power: 0	installing EBC, boost solenoid question well im installing my greddy profec b II and had a question about the boost solenoid. where is it located on the car? the car is a 89 TII / stock turbo/ and external wastegate.

02-17-2009, 06:24 PM	#4
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY iTrader: (0) Posts: 302 Rep Power: 17	shouldn't matter, hook the greddy one directly to the wastegate actuator and directly to the port on the turbo for pressure reference. __________________ My car blows up everytime I start it, it's rotary

02-18-2009, 01:17 PM	#6
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	There's a pressure sensor on the passenger side strut tower, if that's what you're asking. __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

02-17-2009, 06:09 PM	#3
13bt The Newbie Join Date: Feb 2008 Location: Florida iTrader: (0) Posts: 18 Rep Power: 0	oh you mean the black thing that says valve with NO, NC, and COM ports i have that...i meant the stock one.

02-18-2009, 04:11 PM	#7
13bt The Newbie Join Date: Feb 2008 Location: Florida iTrader: (0) Posts: 18 Rep Power: 0	nah i wasn't talking about the pressure sensor. thanks though...everyone else also. was reading the instructions and it was talking about capping the solenoid off. well anyway i have the unit hooked up. one more question, i have the hose from the turbo going into the NC port and the the wastegate line going into the COM port what about the port with NO on it.. do i plug it at all?