does anyone know how to pull the side ducts out?

somchhir1 · 02-15-2009, 04:26 PM

i have an fd and i don't want to mess anything up, so does anyone know the correct way to get these side ducts off the front fenders....thanks for your help...

GorillaRE · 02-15-2009, 05:09 PM

Quote:

Originally Posted by somchhir1

i have an fd and i don't want to mess anything up, so does anyone know the correct way to get these side ducts off the front fenders....thanks for your help...

If you've never done it before and don't want to break them, just take your fender off and then you can see how they are held on.

-J

Doc-1 · 02-16-2009, 01:07 AM

Just had mine off. The fender has to come off to get them off.

REVIT93RX7 · 02-16-2009, 03:14 PM

They are held in by plastic clips. The only real way to get them off is to remove the fender. You can try reaching in after removing the inner wheel liner. But is much more difficult.

ppritchard · 02-17-2009, 08:07 AM

Here you go:

ppritchard · 02-17-2009, 08:09 AM

The big clip faces to front. Plastic clips can/do break. I pulled mine off (back and out), but did break at least one

somchhir1 · 02-17-2009, 12:59 PM

thanks for the info...ppritchard

jkstill · 02-17-2009, 02:10 PM

Also, removing the fender is actually pretty easy.

Removing the fender liner is actually the hardest part of that job.

02-15-2009, 04:26 PM	#1
somchhir1 The boosted the better... Join Date: Jan 2009 Location: Orlando, FL Posts: 130 Rep Power: 17	does anyone know how to pull the side ducts out? i have an fd and i don't want to mess anything up, so does anyone know the correct way to get these side ducts off the front fenders....thanks for your help... __________________ 04 GT Yellow Mica RX-8-sold 93 SSM FD-sold 94 SSM FD-Sold

02-17-2009, 12:59 PM	#7
somchhir1 The boosted the better... Join Date: Jan 2009 Location: Orlando, FL Posts: 130 Rep Power: 17	thanks for the info...ppritchard __________________ 04 GT Yellow Mica RX-8-sold 93 SSM FD-sold 94 SSM FD-Sold

02-16-2009, 01:07 AM	#3
Doc-1 Rotary Fanatic Join Date: Feb 2008 Location: Madison Alabama Posts: 115 Rep Power: 18	Just had mine off. The fender has to come off to get them off.

02-16-2009, 03:14 PM	#4
REVIT93RX7 REVIT Join Date: Sep 2008 Location: Palm Bay, FL Posts: 90 Rep Power: 17	They are held in by plastic clips. The only real way to get them off is to remove the fender. You can try reaching in after removing the inner wheel liner. But is much more difficult.

02-17-2009, 08:07 AM	#5
ppritchard Rotary Fan in Training Join Date: Feb 2008 Location: Orlando Posts: 43 Rep Power: 0	Here you go:

02-17-2009, 08:09 AM	#6
ppritchard Rotary Fan in Training Join Date: Feb 2008 Location: Orlando Posts: 43 Rep Power: 0	The big clip faces to front. Plastic clips can/do break. I pulled mine off (back and out), but did break at least one

02-17-2009, 02:10 PM	#8
jkstill Rotary Fan in Training Join Date: Mar 2008 Posts: 93 Rep Power: 18	Also, removing the fender is actually pretty easy. Removing the fender liner is actually the hardest part of that job.