wuz up

SAW32rally · 01-18-2009, 08:10 PM

hey every one. i am somewhat new to the rotary thing. i have had a 1984 rx7 with a 12a niki carb engine. so far it is dead stock except for a thrush glass pack and the interior has been gutted. at first i wanted to turn it in to a hard core rally monster but now i am thinking more low key. i do want to do a 13b swap and beef up the suspension and rear end. actually i just got it runing again today. it has this little problem with coolant getting in to the combustion chamber. any advice will be very cool. thanks.

Whizbang · 01-18-2009, 08:39 PM

the coolant is probably from the o rings in the intake manifold being shitty.

Rotarydave · 01-19-2009, 12:28 AM

Welcome, and yes you will be needing a motor, coolant in the combustion chamber is very bad

1twistedrx7 · 01-19-2009, 07:36 AM

welcome to rcc

Hello Roto · 01-19-2009, 10:50 AM

dam thats a big ass sig pic ^

SAW32rally · 01-19-2009, 05:14 PM

i might replace the engine any way but first i would like to get this one running. it will be cool if it is just intake Orings. i think. where is the best place to get a 13b. also what is a good price for a stock rebuilt on and a street ported one. thanks.

Whizbang · 01-19-2009, 05:58 PM

for a stock rebuild, take to Kevin Landers (RotaryResurrection)

SAW32rally · 01-20-2009, 05:54 PM

thanks. is the YAW power price on a modified motor good. it lookes like the do a pretty good job?

01-18-2009, 08:10 PM	#1
SAW32rally The Newbie Join Date: Jan 2009 Posts: 15 Rep Power: 0	wuz up hey every one. i am somewhat new to the rotary thing. i have had a 1984 rx7 with a 12a niki carb engine. so far it is dead stock except for a thrush glass pack and the interior has been gutted. at first i wanted to turn it in to a hard core rally monster but now i am thinking more low key. i do want to do a 13b swap and beef up the suspension and rear end. actually i just got it runing again today. it has this little problem with coolant getting in to the combustion chamber. any advice will be very cool. thanks. __________________ rally rx7? SWEEEET!

01-18-2009, 08:39 PM	#2
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	the coolant is probably from the o rings in the intake manifold being shitty. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-19-2009, 07:36 AM	#4
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 Posts: 411 Rep Power: 0	welcome to rcc __________________ Rotary Performance Motors(DGRRXI)sponsor 2011 RPM sale complete rebuilt your choice ported or bridge port short block W/RA seals 2300 no core required plus shipping. we now offer powder coating! 93 mb touring patring out sold! 93 vr touring sold 93vr died violently 93 ssm touring sold 93 black 20b project and a lot of money! underestimated !! http://rotorfest.lefora.com

01-19-2009, 10:50 AM	#5
Hello Roto El Mas Tiguere..DR Join Date: Jan 2009 Location: Big Red Country Posts: 21 Rep Power: 0	dam thats a big ass sig pic ^ __________________ DD: 91' Slow EF'in Hatchback Project: 87' TII Rebuild (Build Thread Pending)

01-19-2009, 05:14 PM	#6
SAW32rally The Newbie Join Date: Jan 2009 Posts: 15 Rep Power: 0	i might replace the engine any way but first i would like to get this one running. it will be cool if it is just intake Orings. i think. where is the best place to get a 13b. also what is a good price for a stock rebuilt on and a street ported one. thanks. __________________ rally rx7? SWEEEET!

01-19-2009, 12:28 AM	#3
Rotarydave Rotary Nut Case Join Date: Jan 2009 Location: Cibolo, TX Posts: 273 Rep Power: 17	Welcome, and yes you will be needing a motor, coolant in the combustion chamber is very bad

01-19-2009, 05:58 PM	#7
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	for a stock rebuild, take to Kevin Landers (RotaryResurrection) __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-20-2009, 05:54 PM	#8
SAW32rally The Newbie Join Date: Jan 2009 Posts: 15 Rep Power: 0	thanks. is the YAW power price on a modified motor good. it lookes like the do a pretty good job? __________________ rally rx7? SWEEEET!