HDP's Red R1

[HDP]

Along with the fuel pump upgrade, I had to upgrade the rest of the fuel system as well. I installed the fuel pressure regulator on the front of the UIM where the stock boost control solenoids were mounted. I had to fabricate a bracket to mount the FPR to one side in order to install the fuel pressure sensor. I also upgraded my fuel injectors to provide adequate fuel for my power level goal. Thanks to David Garfinkle, I was able to mount stock 850cc in the primary rail and 1200cc in the secondary. To get everything flowing smoothly, I opted for -6an fittings and braided stainless hose connected to the hard pipes at the fire wall.