Who's interested in Dual Resonated MP??

***Herblenny*** · 06-30-2008, 02:20 PM

I just got off the phone with the owner of No Limit Industries and he said he's interested in building the Dual Resonated MP for the 8.

He could definitely beat Mazsport dual resonated MP and do a GB for 375-400 ish..

Let me know if you are interested and I'll donate my car as a test subject!

It will be pretty much the same as mazsport version with RB Medium resonators and all. All Stainless!

sumdeus · 06-30-2008, 03:54 PM

I may be interested. Are you going to do some dyno data? Also, what size are they gong to be, 2.5" or 3"?

***Herblenny*** · 06-30-2008, 04:53 PM

Its going to be 3"in. My guy is going to see if he could source it thru RB or another company.. But its going to be 3in... It could be cheaper if he can source it for cheaper or we have more people interested in this.. Please pass on the word!!!

sumdeus · 06-30-2008, 05:22 PM

Cool, Ill try to pass it around. Since my current exhaust is 2.5" (Hymee), would I need to upgrade to a larger exhaust or just suffer some power loss compared to a full 3" setup?

Dannobre · 10-23-2008, 12:46 AM

I'd be in if it's a full 3" all the way.....

Phoenix7 · 10-23-2008, 01:02 AM

will 3" benefit the NA renesis?

I8U · 10-23-2008, 06:05 PM

^Honestly, it could either way. I have the HKS 3" Hi-power cat back and my numbers actually went up. I'd be willing to buy this midpipe, especially since I want to start adding more 2-stroke.

Jon316G · 10-26-2008, 02:37 AM

I would be curious if they could keep the sound down like the MazSport midpipe.
I know a guy who had the Agency Power dual resonator (yes dual... not their single) midpipe and ended up selling it for MazSport's because the sound was still too loud and raspy.
I personally have the MazSport Dual Resonated midpipe and would love for someone to come up with a cheaper alternative.

alz0rz · 11-22-2008, 02:44 AM

Did anything come of this? With Mazsport gone now.. a void has been left open. If someone can make a dual resonated midpipe that compares to mazsports sound deadening and quality (no rasp) that would be good for all..

I'm in for under $400.

jtbshaw · 11-22-2008, 12:00 PM

Phil talked to me about it and I agreed to build these if there was enough interest. Phil had some contacts for the resonators, but nothing has been brought up to me within the past few months. We can still build these, just need to get things in order.

rotorhead87 · 11-22-2008, 12:21 PM

I just informed a friend of mine looking for a midpipe for his RX8 hopefully he comes thru and joins RCC soon.

Jon316G · 11-25-2008, 04:29 PM

On the RX8Club forum, someone is in communication with Racing Beat to create a dual resonated midpipe.

05rex8 · 12-09-2008, 11:54 PM

^that would be me

Their ETA is Feb 2009 with a superior design than mazsports.

Check it out here: http://www.rx8club.com/showthread.php?t=161303

jtbshaw · 12-10-2008, 10:59 PM

I revisited this info today and received some pricing. I can get the hi-flo, ultra quite polished stainless resonators, flanges, tubing (which I already have plenty on hand), O2/wideband bungs (also plenty on hand), gaskets, and stainless mount...weld it all up and I think we can be in the $375-400 range. Full stainless, full 3". I would really like to have a stock piece on hand for building the jig and we can run from there. Anyone interested in letting us use one for jig fitment in exchange for a reduced price, or possibly free, MP?

For the pricing above, I would need at least 10-20 buyers for that price reduction. Otherwise, it would be in the $425-475 range for single purchasers. I will check some of my other sources on some of the items to see if I can get a better price break. I'll update soon.

Todd B.

Dzire · 12-10-2008, 11:16 PM

you can have my car to do the work but i don't want the Dual Resonated

06-30-2008, 04:53 PM	#3
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Its going to be 3"in. My guy is going to see if he could source it thru RB or another company.. But its going to be 3in... It could be cheaper if he can source it for cheaper or we have more people interested in this.. Please pass on the word!!! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

10-23-2008, 06:05 PM	#7
I8U KONI Challenge Crew Join Date: Mar 2008 Location: Goldsboro, NC Posts: 126 Rep Power: 18	^Honestly, it could either way. I have the HKS 3" Hi-power cat back and my numbers actually went up. I'd be willing to buy this midpipe, especially since I want to start adding more 2-stroke. __________________ 04 TiGray RX8 MT, LS2 coil setup, 3" midpipe, HKS Hi-power 3" exhaust, TEIN S-Techs, Hotchkis Adj F/R sways, K&N Typhoon V2, Steel braided brake lines, Redline drivetrain fluids, ATE Super Blue brake fluid, Cobalt XR2/GTS brake combo, MB Motorpsorts Weapons 18x9 +45 offset, 275/35's I Support the KONI Sports Car Challenge!

10-26-2008, 02:37 AM	#8
Jon316G The Newbie Join Date: Oct 2008 Location: Akron, Oh Posts: 16 Rep Power: 0	I would be curious if they could keep the sound down like the MazSport midpipe. I know a guy who had the Agency Power dual resonator (yes dual... not their single) midpipe and ended up selling it for MazSport's because the sound was still too loud and raspy. I personally have the MazSport Dual Resonated midpipe and would love for someone to come up with a cheaper alternative. __________________ Current Mods: Racing Beat REVi Intake, Racing Beat REVi Ram Air Duct, Agency Power Catback Exhaust, MazSport Dual Resonator Midpipe, Agency Power Under-driven Crank Pulley, Autoexe Spark Plug Wires, Hawk Ceramic Brake Pads, OPTIMA 35 RedTop Battery. Oils: Engine= Royal Purple 5w30, Trans= Redline MT-90, Diff= Redline 75w90

11-22-2008, 12:21 PM	#11
rotorhead87 Rotors > Pistons Join Date: Sep 2008 Location: Port Saint Lucie, Florida Posts: 316 Rep Power: 18	I just informed a friend of mine looking for a midpipe for his RX8 hopefully he comes thru and joins RCC soon. __________________ *UPDATED 06/15/2009* Check out My VMIC Turbo 13B-RE FC3S build

11-25-2008, 04:29 PM	#12
Jon316G The Newbie Join Date: Oct 2008 Location: Akron, Oh Posts: 16 Rep Power: 0	On the RX8Club forum, someone is in communication with Racing Beat to create a dual resonated midpipe. __________________ Current Mods: Racing Beat REVi Intake, Racing Beat REVi Ram Air Duct, Agency Power Catback Exhaust, MazSport Dual Resonator Midpipe, Agency Power Under-driven Crank Pulley, Autoexe Spark Plug Wires, Hawk Ceramic Brake Pads, OPTIMA 35 RedTop Battery. Oils: Engine= Royal Purple 5w30, Trans= Redline MT-90, Diff= Redline 75w90

06-30-2008, 03:54 PM	#2
sumdeus Rotary Fanatic Join Date: Mar 2008 Location: Florence, SC Posts: 148 Rep Power: 0	I may be interested. Are you going to do some dyno data? Also, what size are they gong to be, 2.5" or 3"?

06-30-2008, 05:22 PM	#4
sumdeus Rotary Fanatic Join Date: Mar 2008 Location: Florence, SC Posts: 148 Rep Power: 0	Cool, Ill try to pass it around. Since my current exhaust is 2.5" (Hymee), would I need to upgrade to a larger exhaust or just suffer some power loss compared to a full 3" setup?

10-23-2008, 12:46 AM	#5
Dannobre Rotary Fan in Training Join Date: Oct 2008 Posts: 87 Rep Power: 18	I'd be in if it's a full 3" all the way.....

11-22-2008, 02:44 AM	#9
alz0rz The Newbie Join Date: Nov 2008 Posts: 1 Rep Power: 0	Did anything come of this? With Mazsport gone now.. a void has been left open. If someone can make a dual resonated midpipe that compares to mazsports sound deadening and quality (no rasp) that would be good for all.. I'm in for under $400.

11-22-2008, 12:00 PM	#10
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	Phil talked to me about it and I agreed to build these if there was enough interest. Phil had some contacts for the resonators, but nothing has been brought up to me within the past few months. We can still build these, just need to get things in order.

12-09-2008, 11:54 PM	#13
05rex8 Turbo 8 Join Date: Oct 2008 Posts: 131 Rep Power: 18	^that would be me Their ETA is Feb 2009 with a superior design than mazsports. Check it out here: http://www.rx8club.com/showthread.php?t=161303

12-10-2008, 10:59 PM	#14
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	I revisited this info today and received some pricing. I can get the hi-flo, ultra quite polished stainless resonators, flanges, tubing (which I already have plenty on hand), O2/wideband bungs (also plenty on hand), gaskets, and stainless mount...weld it all up and I think we can be in the $375-400 range. Full stainless, full 3". I would really like to have a stock piece on hand for building the jig and we can run from there. Anyone interested in letting us use one for jig fitment in exchange for a reduced price, or possibly free, MP? For the pricing above, I would need at least 10-20 buyers for that price reduction. Otherwise, it would be in the $425-475 range for single purchasers. I will check some of my other sources on some of the items to see if I can get a better price break. I'll update soon. Todd B.

12-10-2008, 11:16 PM	#15
Dzire Rotary Fanatic Join Date: Apr 2008 Location: B,ham AL/Hollywood FL Posts: 151 Rep Power: 18	you can have my car to do the work but i don't want the Dual Resonated __________________ RX8 2004 GT RX7 1988 TII Last edited by Dzire; 12-11-2008 at 02:58 PM.