Twin pump assembly GB?

charlies7 · 03-07-2008, 04:19 PM

Since I am going with a twin pump assembly why not a GB?

sk8world · 03-07-2008, 06:08 PM

price. and whats included? I have dual pumps already but this set up is much cleaner..

KaiFD3S · 03-07-2008, 06:33 PM

Quote:

Originally Posted by charlies7

Since I am going with a twin pump assembly why not a GB?

I bought that set up from Too_Slow, let me tell you that is a beautiful piece, I almost don't want to install, I just want to frame it and look at it...lol...

RXtacy · 03-07-2008, 07:55 PM

That is quite tempting, I love all of CJ's pieces, awesome craftsmanship.

charlies7 · 03-07-2008, 08:29 PM

Well I am definately running one this summer, excuse me while I wipe my chin...

railgun · 03-07-2008, 09:07 PM

I'm running that too...love it!

glenrx7 · 03-09-2008, 09:39 PM

I would also like to see a price, really nice set up.

RXtacy · 03-09-2008, 09:53 PM

From CJ-Motorsports website. List price is $315.

Quote:

The rotary engine relies on a quality supply of fuel. Since it is sensitive to under-fueling, it is a good idea to upgrade to twin fuel pumps in your RX7 before running into starvation problems when tuning for high boost and horsepower.
The CJ Motorsports twin pump assembly is unmatched in quality and fit. You get a billet 6061 aluminum CNC machined flange with 3 bulkhead fittings that are -6 in size. Also included is a fuel safe 6-pin bulkhead electrical connector to safely and professional source power and ground for your pumps and fuel level sensor. Included are a pair of connectors and matching terminals that connect to this bulkhead on both the inside and outside of the flange for quick disconnect serviceability.
The pumps are supported by isolating plastic brackets with viton o-rings. This will keep the pumps quiet and not squeeze them together too tightly, distorting the internals.

You will be happy to find that this unit is available in 2 versions; twin walbros, or twin bosch. Use the corresponding ordering button for the version you prefer. Also, you may swap just the 2 brackets to change your fuel pump type later.

20b 3rd gen · 03-09-2008, 10:00 PM

so its $315 for the setup or just the housings with no pumps or lines.

20b 3rd gen · 03-09-2008, 10:02 PM

never mind just checked the website price is for the assembly only. How much for a drop in unit?

charlies7 · 03-09-2008, 11:48 PM

figure 2 pumps would cost 200 bucks and wiring here and there, 550?

RXtacy · 03-10-2008, 12:01 AM

Quote:

Originally Posted by 20b 3rd gen

never mind just checked the website price is for the assembly only. How much for a drop in unit?

Correct the price is just for the assembly, pumps, lines, and wiring is up to you.

oorx7 · 03-10-2008, 01:03 PM

Not sure about running a group buy at the moment. I will talk it over with my business partner and see.

To_Slow · 03-10-2008, 01:22 PM

Quote:

Originally Posted by KaiFD3S

I bought that set up from Too_Slow, let me tell you that is a beautiful piece, I almost don't want to install, I just want to frame it and look at it...lol...

You are welcome Kai. The twin pump i put together is a nice pece. But do to going with a mechanical fuel pump, i had to get rid off it.

Let me know when you install it and how its working out for you.

Thanks aka to_slow

13bmaniac · 03-11-2008, 09:27 AM

well im interested in a twin pump set up an these is the cleanest i ever seen , so the gb will proceed? or i will have to contact these guys by miself... please let us know i think that several people are interested in these.
and what will be the price of course...

03-07-2008, 04:19 PM	#1
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago Posts: 319 Rep Power: 18	Twin pump assembly GB? Since I am going with a twin pump assembly why not a GB?

03-07-2008, 09:07 PM	#6
railgun Rotolicious Join Date: Feb 2008 Location: ORD-LHR Posts: 60 Rep Power: 18	I'm running that too...love it! __________________ Rc³

03-07-2008, 06:08 PM	#2
sk8world 600rwhp club member. Join Date: Mar 2008 Posts: 551 Rep Power: 18	price. and whats included? I have dual pumps already but this set up is much cleaner..

03-07-2008, 08:29 PM	#5
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago Posts: 319 Rep Power: 18	Well I am definately running one this summer, excuse me while I wipe my chin...

03-09-2008, 09:39 PM	#7
glenrx7 Rotary Fanatic Join Date: Feb 2008 Location: Arizona Posts: 199 Rep Power: 18	I would also like to see a price, really nice set up.

03-09-2008, 10:00 PM	#9
20b 3rd gen Rotary Fanatic Join Date: Mar 2008 Location: Calera, AL Posts: 187 Rep Power: 18	so its $315 for the setup or just the housings with no pumps or lines.

03-09-2008, 10:02 PM	#10
20b 3rd gen Rotary Fanatic Join Date: Mar 2008 Location: Calera, AL Posts: 187 Rep Power: 18	never mind just checked the website price is for the assembly only. How much for a drop in unit?

03-09-2008, 11:48 PM	#11
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago Posts: 319 Rep Power: 18	figure 2 pumps would cost 200 bucks and wiring here and there, 550?

03-10-2008, 01:03 PM	#13
oorx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 57 Rep Power: 18	Not sure about running a group buy at the moment. I will talk it over with my business partner and see.

03-11-2008, 09:27 AM	#15
13bmaniac Rotary Fan in Training Join Date: Mar 2008 Posts: 57 Rep Power: 18	well im interested in a twin pump set up an these is the cleanest i ever seen , so the gb will proceed? or i will have to contact these guys by miself... please let us know i think that several people are interested in these. and what will be the price of course...