new to rx8's, not new to rotarys.

sumdeus · 10-18-2008, 09:51 AM

The 6-disc changer is easy enough to use, hit load and then when the display says ready you insert the disc, repeat 5 more times.

There is a whole thread about oil... the consensus is dont use 5w20.

I premix with just some 2-stroke engine oil, I bought a big gallon jug plus a smaller one (either 8 or 16oz... I forgot), so when I fill up with gas I also fill up the small jug and add that. Its a 16gallon tank, so I am adding either 0.5oz or 1oz per gallon.

Unless you remove the cat, premix should not cause you to fail emissions, but if you remove the cat you will fail regardless.

10-18-2008, 09:51 AM	#1
sumdeus Rotary Fanatic Join Date: Mar 2008 Location: Florence, SC Posts: 148 Rep Power: 0	The 6-disc changer is easy enough to use, hit load and then when the display says ready you insert the disc, repeat 5 more times. There is a whole thread about oil... the consensus is dont use 5w20. I premix with just some 2-stroke engine oil, I bought a big gallon jug plus a smaller one (either 8 or 16oz... I forgot), so when I fill up with gas I also fill up the small jug and add that. Its a 16gallon tank, so I am adding either 0.5oz or 1oz per gallon. Unless you remove the cat, premix should not cause you to fail emissions, but if you remove the cat you will fail regardless.