Some wiring questions...

Max777 · 07-29-2008, 01:52 AM

Ok, so recently I rewrapped my chassis harness, and put it back in the car...

I ran into some funny issues. first, is the fuse box cover. I can SWEAR there was a ring terminal I had to bolt up to the fuse box before, but now I have nothing???

Here's a pic:

Also, I have this random ground, where does it go?

Did I do what I think I did and wrap it wrong? I have some plugs that just dont make sense right now with trying to put everything back in, lol.

classicauto · 07-29-2008, 10:11 AM

There's definetley a ring terminal for the fuse panel. Thats the main power....

I'll look at my chassis tonite and see if I can find that two wire ground...it looks familiar.

Max777 · 07-29-2008, 08:16 PM

EDIT: Ok, so I feel really stupid right about now!

I was looking at the box with some spare parts in it, and I was like... wait, wtf is this?

It turns out that I completely forgot about the charging harness that also goes in the area. I will have to take it all apart and re-wrap it as well, since it's pretty nasty right now.

PS: I still dont know where that ground in the second pic goes btw, so if anyone has a sugesstion, I will be glad to hear it!

need RX7 · 07-30-2008, 01:29 AM

Hmmm...That ground kind of looks like the one that goes on top of the block, but it's nowhere near that area. I'll go take a look on my car real quick (hopefully it's the same between S4 and S5.)
EDIT: well, I went and looked and didn't see any of those type of grounds in that area. I'll take a better look tomorrow (It [u]is[/i] 3 in the morning).

need RX7 · 07-30-2008, 06:49 PM

I think it's this ground here:

From THIS page (very useful about grounding)

TehMonkay · 07-30-2008, 08:59 PM

how would the ground migrate from the engine harness to the body harness? lol

btw, the FSm shows the chassis ground points, all of them, at least the S4 manual does.

need RX7 · 07-30-2008, 09:03 PM

Quote:

Originally Posted by TehMonkay

how would the ground migrate from the engine harness to the body harness? lol

Magic?

Max777 · 07-31-2008, 12:14 AM

ok, I will take a look in the FSM if I can find it for my car... I only have the Haynes one right now...

Boostmaniac · 07-31-2008, 12:41 AM

Quote:

Originally Posted by TehMonkay

how would the ground migrate from the engine harness to the body harness? lol

It is an RX7, I learned never to question these things at an early age.

For what it is worth, when I removed my engine, I discovered I had 0 grounds going to the chassis.... again, never question these things. It's like Santa Claus, if you ask questions, he won't ever come to your house again, and that is just a sad sad thing.

Max777 · 07-31-2008, 12:56 AM

ok, i still dont know where the hell that gound goes, but I did get the chassis harness fully re-wrapped and put it back on.

Now, for a question about the fuse box, guys, which side does the black wire w/ white stipe go? I put on the the side with one bolt)

But I thought that maybe it should go on the other sidem, because the stripe wire is a ground? (The side with 2 bolts on it seems to branch out to the other fuses, so maybe the gound should go there???)

Ok, thanks people!

EDIT: LOL at the /\ post!

TehMonkay · 07-31-2008, 10:51 AM

i'm not sure what side really, but the wiring section of the fsm tells wire colors and all that

Max777 · 07-31-2008, 12:32 PM

damn you and your so called "fsm"

Max777 · 07-31-2008, 01:54 PM

Well, I looked in the FSM... not much help, because I couldnt find anything...

87TurboII · 07-31-2008, 04:03 PM

Well on the fuse box on my S5 Vert the black wire with the white stripe goes to the side facing the strut tower on the top bolt (might be the only bolt there on that side). The other solid black wire faces the front of the car connected to the bottom bolt.

As for that ground I was looking and saw that I have one that looks like that and it bolts to the back side of the strut tower right next to the trailing coil pack.

Max777 · 08-03-2008, 01:25 AM

Ok, phoenix already told me about the grounds, but THANK YOU for showing me the ground dude, you rock!

07-29-2008, 01:52 AM	#1
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	Some wiring questions... Ok, so recently I rewrapped my chassis harness, and put it back in the car... I ran into some funny issues. first, is the fuse box cover. I can SWEAR there was a ring terminal I had to bolt up to the fuse box before, but now I have nothing??? Here's a pic: Also, I have this random ground, where does it go? Did I do what I think I did and wrap it wrong? I have some plugs that just dont make sense right now with trying to put everything back in, lol. __________________ Rotaries:They are NOT that complicated!

07-29-2008, 08:16 PM	#3
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	EDIT: Ok, so I feel really stupid right about now! I was looking at the box with some spare parts in it, and I was like... wait, wtf is this? It turns out that I completely forgot about the charging harness that also goes in the area. I will have to take it all apart and re-wrap it as well, since it's pretty nasty right now. PS: I still dont know where that ground in the second pic goes btw, so if anyone has a sugesstion, I will be glad to hear it! __________________ Rotaries:They are NOT that complicated! Last edited by Max777; 07-30-2008 at 12:17 AM..

07-30-2008, 01:29 AM	#4
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI iTrader: (0) Posts: 485 Rep Power: 17	Hmmm...That ground kind of looks like the one that goes on top of the block, but it's nowhere near that area. I'll go take a look on my car real quick (hopefully it's the same between S4 and S5.) EDIT: well, I went and looked and didn't see any of those type of grounds in that area. I'll take a better look tomorrow (It [u]is[/i] 3 in the morning). __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress. Last edited by need RX7; 07-30-2008 at 01:41 AM..

07-30-2008, 06:49 PM	#5
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI iTrader: (0) Posts: 485 Rep Power: 17	I think it's this ground here: From THIS page (very useful about grounding) __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

07-30-2008, 08:59 PM	#6
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY iTrader: (0) Posts: 302 Rep Power: 17	how would the ground migrate from the engine harness to the body harness? lol btw, the FSm shows the chassis ground points, all of them, at least the S4 manual does. __________________ My car blows up everytime I start it, it's rotary Last edited by TehMonkay; 07-30-2008 at 09:02 PM..

07-29-2008, 10:11 AM	#2
classicauto crash auto?fix auto Join Date: Feb 2008 iTrader: (0) Posts: 816 Rep Power: 17	There's definetley a ring terminal for the fuse panel. Thats the main power.... I'll look at my chassis tonite and see if I can find that two wire ground...it looks familiar.

07-31-2008, 12:14 AM	#8
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	ok, I will take a look in the FSM if I can find it for my car... I only have the Haynes one right now... __________________ Rotaries:They are NOT that complicated!

07-31-2008, 12:56 AM	#10
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	ok, i still dont know where the hell that gound goes, but I did get the chassis harness fully re-wrapped and put it back on. Now, for a question about the fuse box, guys, which side does the black wire w/ white stipe go? I put on the the side with one bolt) But I thought that maybe it should go on the other sidem, because the stripe wire is a ground? (The side with 2 bolts on it seems to branch out to the other fuses, so maybe the gound should go there???) Ok, thanks people! EDIT: LOL at the /\ post! __________________ Rotaries:They are NOT that complicated! Last edited by Max777; 07-31-2008 at 12:58 AM..

07-31-2008, 10:51 AM	#11
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY iTrader: (0) Posts: 302 Rep Power: 17	i'm not sure what side really, but the wiring section of the fsm tells wire colors and all that __________________ My car blows up everytime I start it, it's rotary

07-31-2008, 12:32 PM	#12
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	damn you and your so called "fsm" __________________ Rotaries:They are NOT that complicated!

07-31-2008, 01:54 PM	#13
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	Well, I looked in the FSM... not much help, because I couldnt find anything... __________________ Rotaries:They are NOT that complicated!

07-31-2008, 04:03 PM	#14
87TurboII Rotary Fan in Training Join Date: Jul 2008 Location: Texas iTrader: (0) Posts: 45 Rep Power: 0	Well on the fuse box on my S5 Vert the black wire with the white stripe goes to the side facing the strut tower on the top bolt (might be the only bolt there on that side). The other solid black wire faces the front of the car connected to the bottom bolt. As for that ground I was looking and saw that I have one that looks like that and it bolts to the back side of the strut tower right next to the trailing coil pack. __________________ 1987 Turbo II Last edited by 87TurboII; 07-31-2008 at 04:11 PM..

08-03-2008, 01:25 AM	#15
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	Ok, phoenix already told me about the grounds, but THANK YOU for showing me the ground dude, you rock! __________________ Rotaries:They are NOT that complicated!