t2 housings n/a internals

[vex]

Originally Posted by Low Impedance

i might be able to do so in comparing a 12a four port to a GSLSE, and/or S4 6 port. I only have a turbo center iron.

If you could snap a picture of a direct view of the ports at the same distance that would be great. I'm thinking maybe individually taking the pictures of the ports at 1.5-2ft out on a tripod, then replacing the iron in the same location so we get a little bit of accuracy on the ports (that way one won't appear bigger than the other, etc).

My thinking is that the "no-no" spots or the limits of porting are the same location for the 4 port and 6 port, but I may be mistaken on that.