Why can't I attach images to posts anymore?

[RETed]

Originally Posted by Pete_89T2

If the Elite 550 has CAN bus, there are a number of CAN bus gauges on the market now that can basically display whatever your ECU spits out on the bus, so 1 or 2 gauges gives you everything you could want. I'm using one of these BTI gauges with my AEM Infinity: http://www.btigauges.com/aem-infinity.html


Here's another vendor's product that appears to offer more flexibility in programming exactly what you want to display. Kind of makes me wish I knew about them before buying the BTI gauge!


https://gaugeart.com/product/gaugeart-can-gauge/

I'm too old-school to deal with CANbus stuff.

I'm also old-school that I prefer analog (display) gauges...
I have a couple of old SPI Motorsport gauges that have really nice backlighting, but I've lost the pressure sensor for the fuel pressure gauge, and I can't find a replacement.
I've been eyeing the Stack stuff for years but never had the money to go after them - each gauge is $200+.
I also was trying to cut down the number of gauge installed, cause it's just mentally fatiguing to scan all of them!
Current have:
* 60mm peak / hold GReddy boost gauge
* 60mm peak / hold GReddy EGT gauge
* J&S dual knock + narrow-band O2 display
* 52mm SPI fuel pressure gauge (not working, no sensor)
* 52mm SPI water temp gauge
* 2-1/8" VDO oil temp gauge
* 2-1/8" VDO oil pressure gauge
* 46mm HKS voltmeter - for system voltage
* 46mm HKS voltmeter - for fuel pump voltage

I'm going to consolidate the oil temp and water temp gauge by running a DPDT switch to switch between the sensors and running a single gauge.
I'm going to consolidate the oil pressure and fuel pressure gauge by running a DPDT switch to switch between...
I'm going to consolidate the system voltage and fuel pump voltage by running a DPST switch between...
You get the idea.


-Ted

[FC Zach]

Originally Posted by RETed

I'm going to consolidate the oil temp and water temp gauge by running a DPDT switch to switch between the sensors and running a single gauge.
I'm going to consolidate the oil pressure and fuel pressure gauge by running a DPDT switch to switch between...
I'm going to consolidate the system voltage and fuel pump voltage by running a DPST switch between...
You get the idea.


-Ted

I too didn't want a dash full of gauges so I did the same thing.

[chibikougan]

Originally Posted by FC Zach

I too didn't want a dash full of gauges so I did the same thing.

I just got rid of the whole thing because I don't want a bunch if gauges..





Yeah that's why....

[RETed]

Originally Posted by chibikougan

I just got rid of the whole thing because I don't want a bunch if gauges..





Yeah that's why....

Damn Cheebs, you got big cajones!


-Ted