RX8 motor into 1st gen ?

[estevan62274]

Originally Posted by BrewerBob

Brian will piss in your fruitloops if you do this on the cheap. Aftermarket ECU will be easier but more expensive. If you want to drive it, go stock. If you want to data log, you'll have to go aftermarket or use the 8 dash.

Brain says he has a 1,000 hrs in the build; I believe him. I only mention this if you are NOT doing the work yourself. At $20 an hour labor rate, you are looking at $20k car without buying a single part. Never mind the fact that shops charge $75~$150 an hour.

My donor RX-8 was $3k. The FB I already had but got it for $400. It wouldn't run in '04 when I bought it. Rebuilt the carb and it ran fine. Good luck finding a rolling chassis for that price.

Ask Brian (Bri, feel free to share, I don't mind in the least) what the parts cost were. I'm thinking it was somewhere around $12k including the RX-8.

Just wanted to say I seen your FB at DGRR this year and it's sweet swap!
Brian did a kick ass job!!

Nice meeting and chatting with you too Brian
Steve

[TitaniumTT]

Originally Posted by djmtsu

You guys are expensive.

We can do that in TN for like $80 and a case of high octane beer.

Maybe 4 Loko.

There's some voodoo going on in TN

Originally Posted by estevan62274

Just wanted to say I seen your FB at DGRR this year and it's sweet swap!
Brian did a kick ass job!!

Nice meeting and chatting with you too Brian
Steve

Thanks Steve! Great to meet you too! Always love seeing that 8 of your pop up since leaving us in PA! You've done a great job with it!

[estevan62274]

Originally Posted by TitaniumTT

Thanks Steve! Great to meet you too! Always love seeing that 8 of your pop up since leaving us in PA! You've done a great job with it!

Thx man