Middle TN - Thread - Page 232

***TitaniumTT*** · 04-29-2016, 11:06 AM

Relocate battery response.

4/0 is a monster cable.... I would suggest 2ga from ProWireUsa.com seriously nice shit.
There are also butt connectors available from WayTek wire although what I do and it works really well is run the 2ga from the battery to a circuit breaker, to a bulkhead connector at the firewall.

https://www.waytekwire.com/item/4720...Stud-Red-250A/

From there it goes to the starter, the alt, and on the FC's it goes to the long JCase fuse block

FC Zach · 04-29-2016, 11:15 AM

Quote:

Originally Posted by TitaniumTT

Relocate battery response.

4/0 is a monster cable.... I would suggest 2ga from ProWireUsa.com seriously nice shit.

You don't think 2ga is too small? Then again I used 4/0 to get the most out of my little PC680 and from a further distance. . .

***TitaniumTT*** · 04-29-2016, 11:43 AM

Nope, Looking at the A rating, 2 is fine.

***TitaniumTT*** · 05-09-2016, 01:17 PM

Who's got an S4 front harness they no longer need?

project86 · 05-09-2016, 01:53 PM

Anybody know of a good write up or vid tutorial on taking out the cold start assist, 3k warm up and thermal pellet? Or maybe we can all get together soon and a few of you can assist me in doing it all? I have BOPs to do too.

almoststockfc · 05-09-2016, 01:55 PM

Quote:

Originally Posted by TitaniumTT

Who's got an S4 front harness they no longer need?

I should. Ill check

chibikougan · 05-09-2016, 02:05 PM

Quote:

Originally Posted by project86

Anybody know of a good write up or vid tutorial on taking out the cold start assist, 3k warm up and thermal pellet? Or maybe we can all get together soon and a few of you can assist me in doing it all? I have BOPs to do too.

http://www.rotaryresurrection.com/2n...s_removal.html

***TitaniumTT*** · 05-09-2016, 02:45 PM

Quote:

Originally Posted by almoststockfc

I should. Ill check

Cheers!!

almoststockfc · 05-10-2016, 06:14 AM

The one that i have is hacked up for parts. I thought there was another s4 but no. Do you need the whole thing or something specific?

FC Zach · 05-10-2016, 06:18 AM

Quote:

Originally Posted by almoststockfc

I thought there was another s4 but no.

I think I may have it, there was one hanging under the house but I wasn't sure what it was. . I'll look to see if I still have it.

***TitaniumTT*** · 05-10-2016, 08:24 AM

Cheers guys. Really appreciate it.
Yeah, need the whole thing. Adding AC back into the FC and my front harness has been modded so many times for different things at this point it would be easier to start with an unmodified one, move the main fuse block, re-wire the headlights, etc etc
We had an FC at the shop that was destined for the crusher and I stripped every harness out of it so I have one, just don't want to use it..... yet... if I don't have to

reddozen · 05-10-2016, 08:43 AM

I have an S5... lol

almoststockfc · 05-10-2016, 09:23 AM

DJ should have the one out of that crusty ass blue car that we pulled the motor out of for his cosmo. I think that car was a SE so idk if it came with AC or not.

***TitaniumTT*** · 05-10-2016, 09:33 AM

Hmmmmmmm.... interesting... I'll have to text his ass.
My car was originally an SE as well. All the provisions were there for the power windows and mirrors and crap like that.

JL1RX7 · 05-10-2016, 11:38 AM

How much of the wiring did they change between 4 and 5? I would think those harnesses couldn't be much different.

04-29-2016, 11:06 AM	#3466
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Relocate battery response. 4/0 is a monster cable.... I would suggest 2ga from ProWireUsa.com seriously nice shit. There are also butt connectors available from WayTek wire although what I do and it works really well is run the 2ga from the battery to a circuit breaker, to a bulkhead connector at the firewall. https://www.waytekwire.com/item/4720...Stud-Red-250A/ From there it goes to the starter, the alt, and on the FC's it goes to the long JCase fuse block __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-29-2016, 11:43 AM	#3468
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Nope, Looking at the A rating, 2 is fine. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-09-2016, 01:17 PM	#3469
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Who's got an S4 front harness they no longer need? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-09-2016, 01:53 PM	#3470
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	Anybody know of a good write up or vid tutorial on taking out the cold start assist, 3k warm up and thermal pellet? Or maybe we can all get together soon and a few of you can assist me in doing it all? I have BOPs to do too. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

05-10-2016, 06:14 AM	#3474
almoststockfc ..... Join Date: Jan 2010 Location: Murfreesboro, TN Posts: 543 Rep Power: 16	The one that i have is hacked up for parts. I thought there was another s4 but no. Do you need the whole thing or something specific? __________________ -75 RE_W_PU - -76 Hercules W2000 - DGRR 2012 3rd place Old School -75 Hercules W2000 MSO - DGRR 2011 Peoples Choice - April 2011 Rotary of the Month -Rotary snowmobile powered go kart - DGRR 2012 Peoples Choice - RIP

05-10-2016, 08:24 AM	#3476
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Cheers guys. Really appreciate it. Yeah, need the whole thing. Adding AC back into the FC and my front harness has been modded so many times for different things at this point it would be easier to start with an unmodified one, move the main fuse block, re-wire the headlights, etc etc We had an FC at the shop that was destined for the crusher and I stripped every harness out of it so I have one, just don't want to use it..... yet... if I don't have to __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-10-2016, 08:43 AM	#3477
reddozen Gold Wheels FTW Join Date: Mar 2008 Posts: 744 Rep Power: 18	I have an S5... lol __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

05-10-2016, 09:23 AM	#3478
almoststockfc ..... Join Date: Jan 2010 Location: Murfreesboro, TN Posts: 543 Rep Power: 16	DJ should have the one out of that crusty ass blue car that we pulled the motor out of for his cosmo. I think that car was a SE so idk if it came with AC or not. __________________ -75 RE_W_PU - -76 Hercules W2000 - DGRR 2012 3rd place Old School -75 Hercules W2000 MSO - DGRR 2011 Peoples Choice - April 2011 Rotary of the Month -Rotary snowmobile powered go kart - DGRR 2012 Peoples Choice - RIP

05-10-2016, 09:33 AM	#3479
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Hmmmmmmm.... interesting... I'll have to text his ass. My car was originally an SE as well. All the provisions were there for the power windows and mirrors and crap like that. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-10-2016, 11:38 AM	#3480
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA Posts: 487 Rep Power: 18	How much of the wiring did they change between 4 and 5? I would think those harnesses couldn't be much different.