torque Specs, more than you could ask

[Demonsniper1]

Let me just finish posting my list since you left a few parts out with the copy and paste.
AUTO
Oil pan bolts/bracket 52-69 in-lbs
Vacuum diaphragm bolts 69-95 in-lbs
Rubber mount 12-17 ft-lbs
Trans mount A(4 Outside bolt) 23-34 ft-lbs/ B(middle nut) 41- 59 ft-lbs
Starter A(bolts)23-34 ft-lbs/ B(nut for wiring) 87-104 in-lbs
Trans to Engine bolts 27-38 ft-lbs
Cross member for convertible 27-40 ft-lbs
Oil pipes bolts 17-26 ft-lbs
Bolt/clamp that holds oil pipes together 69-95 in-lbs
Fill/dip stick tube bolts 69-95 in-lbs
Shift lever screws 13-26 in-lbs
Selector lever nut 69-95 in-lbs
Selector cable locknut 7-11 ft-lbs
Driveshaft 36-43 ft-lbs

BRAKES
Brake booster/ power brake unit to frame(4 nuts) 14-19 ft-lbs
Master to brake booster nuts 7-12 ft-lbs
Hard lines to Master 9-16 ft-lbs
Pedal adjustment Locknuts A(In front of pedal) 10-13 ft-lbs/B(behind pedal on rod) 17-25 ft-lbs
FRONT
Caliper bracket bolts 58-72 ft-lbs
Caliper to bracket bolts(bolt that helps rotate up on single pistons) 23-30 ft-lbs
Soft lines to caliper 16-20 ft lbs(single piston)/ 9-16 ft-lbs(4 piston)
Bleeder screw 52-78 in-lbs
REAR
Caliper to bracket bolts (bolt that helps rotate up) 12-17 ft-lbs
Caliper bracket bolts 33-40 ft-lbs
E-brake cable nuts 14-21 ft-lbs
Soft line banjo bolt 16-22 ft-lbs
Bleeder screw 52-78 in-lbs
Parking brake lever bolts 14-19 ft-lb

REAR END/SUSPENSION
Axles to Differential 40-47 ft-lbs
Axles to rear hub 174-231 ft-lbs
Differential fill/drain plugs 29-40 ft-lbs
Differential mounting nuts 54-69 ft-lbs
Shocks Lower bolt 46-69 ft-lbs/ Upper(to body) nuts 17-22 ft-lbs
Subframe nuts 72-87 ft-lbs
Control link bolts(Trailing arm/Subframe) 27-40 ft-lbs
Adjusting bolt and cam plate 46-70 ft-lbs
Lateral link (Trailing arm nut) 22-33 ft-lbs/ (sub frame nut) 33-43 ft-lbs
Sublink bolts 54-69 ft-lbs
Control link(trailing arm/sway bar) 27-40 ft-lbs
Sway bar mounts 27-40 ft-lbs
Front diff mount nuts 65-77 ft-lbs

FRONT SUSPENSION
Lower control Arm (front bolt/nut) 46-69 ft-lbs/ Rear bolts 43-54 ft-lbs
Control link (to arm/bolt) 27-37 ft-lbs/ (to sway bar/nut) 27-40 ft-lbs
Sway Bar mounts 13-20 ft-lbs
Shocks lower bolts 69-86 ft-lbs/ Upper(to body) nuts 22-27 ft-lbs

STEERING SYSTEM
Tie-rod end bolt 22-33 ft-lbs
Tie-rod end Locknut (right after boot) 25-29 ft-lbs
Steering Wheel nut 29-36 ft-lbs
Intermediate Shaft bolts (Upper Bolt) 13-20 ft-lbs/(Lower bolt) 12-17 ft-lbs
Steering Shaft bolts 12-17 ft-lbs
P/S rack mounting bolts 22-33 ft-lbs

OTHERS
Sunroof nuts 5-6.5 ft-lbs
Convertible top motor bolts 23-34 ft-lbs
Convertible top fabric Hook/Bolts 22-31 in-lbs/ Nuts 37-55 in-lbs
Seat bolts 28-38 ft-lbs
Convertible roof panel locks 37-55 in-lbs/ hinges 5.1-7.2 ft-lbs

[chibikougan]

Hey guys here are all the torque specs for every part every year every car...Plus the whole FSM... We don't need HC style posts of random info. We have Factory Service Manuals...
Or go to the source.

I like the idea but the info is already put together so well...



http://foxed.ca/index.php?page=rx7manual