Carbotech brake pad advice

[RETed]

Side note on brake dust...

I dunno if you guys know of this product called P21S *gel*...

This stuff has been recently released in a past few years?

I came across this stuff on YouTube.
https://www.youtube.com/watch?v=XgW-XDKRxuU
There's a bunch of them vids on YouTube if you do a search (i.e. "p21s gel").

Brake dust should not be a problem anymore.


-Ted

[speedjunkie]

Originally Posted by TitaniumTT

I run the carbotechs and love them for what they are, oh, I run the XP-08Dust-A-Lots. The noise on the street isn't all that bad, infact they only time I hear them is pulling to a stop with almost zero pressure, and they squeak a little, it's really not that bad at all. The dust on the other hand.... Oh man... it's pretty bad, especially with the wheels I run they are a bitch to clean, and need it almost every week... Ive been slacking lately and it's gotten to the point that I'm going to have to pull the wheels to clean them properly.

It got so bad that a few years ago I bought a set of the AX6's and threw them in when I put the car back on the rd in the spring. I ran them down to DGRR and for a month after that, then I had a track day and put the XP08 Dusty's in there.... I haven't taken them out yet, they stopping power is that much better.

Heat is another problem that I have been fighting, they create so much heat, and with the al hat on the 2-piece rotor, all that heat gets transmitted to the hub and then to the bearings, so I'm constantly tightening wheel bearings and repacking bearings, the FD has a different hub/bearing and it might be fine, but I would duct the FUCK outta the front brakes....

Cool. I'm not really big on dust as much as noise. I guess I haven't had pads that dust as much as yours probably, so it's a small issue to me now, but probably not if I dealt with it as much as you do. So dust and heat are your only issues with them? And you like the XP08 more than the AX6? I'm not too keen on messing up my bearings, but I am planning on ducting the new setup, so maybe it won't be so bad.

A buddy that uses Carbotechs also sent me a link for Winmax pads. I've never heard of them before today and I didn't find anything on either here or 7club about them, but I googled them and I guess they're pretty legit in Japan and some S2000 and FT86 guys use them. I'd still be nervous running them without anyone else's experience with them on their FD.

Originally Posted by RETed

Side note on brake dust...

I dunno if you guys know of this product called P21S *gel*...

This stuff has been recently released in a past few years?

I came across this stuff on YouTube.
https://www.youtube.com/watch?v=XgW-XDKRxuU
There's a bunch of them vids on YouTube if you do a search (i.e. "p21s gel").

Brake dust should not be a problem anymore.


-Ted

Thanks, Ted! I'll check that out.