GURUS needed. . Do I have a switch problem?

[infernosg]

Still seems like it's something wrong with the switch. I assume you replaced the relays per one of the many how-to's? I destroyed my first switch attempting to do the same. I ended up pulling the little copper sleeves out of the circuit board.

See my reply in your WTB thread. I have a rear-wiperless switch from a 86 that's not been confirmed to work but I don't need it.

[FC Zach]

Originally Posted by infernosg

Still seems like it's something wrong with the switch. I assume you replaced the relays per one of the many how-to's?

That what I was thinking. Yeah I used the how-to from fc3spro.com

Originally Posted by infernosg

I destroyed my first switch attempting to do the same. I ended up pulling the little copper sleeves out of the circuit board.

I was worried I may have done this since it's not uncommon and I've done it plenty of times at work. I was really careful, paying close attention not to but I may have. .

Originally Posted by infernosg

See my reply in your WTB thread. I have a rear-wiperless switch from a 86 that's not been confirmed to work but I don't need it.

Thanks, checking now.

[FC Zach]

My switch came in from infernosg and the wipers now function as they should and return to the home position but only for one setting (1st speed). Glad it was nothing else, thanks for the help once again!