It looked so simple at first!

[GySgtFrank]

For those interested in exactly what idiotic plan I have in mind to build a new lower subframe.

lower subframe version 2.0 by GySgtFrank, on Flickr

I set up a jig of the frame rails on my welding bench and did a solid tack on 1/4" thick 1.5" angle for the base. I'm using schedule 40 pipe (.2" thick) and cutting out 1/4" rounds with the proper 5/8" center holes to make up the A arm mounts. I had to have something to keep the arms in alignment as I moved it around to get the proper inward and downward angles. Welded the first one down and am building a front support piece from 3/16" plate. Then I have to figure out how to mirror all the angles and distances on the other side. Once both sides are in and correct, I will weld in the cross brace and studs to support the steering rack. I figure I can cut away the unneeded excess when everything is solid. That's the plan anyway.

supports in and boxed by GySgtFrank, on Flickr

supports in and boxed.