Mount coils directly to the plugs

[RETed]

Let me get this straight...

You want to mount your coils onto something other than directly onto the engine / spark plugs?

You don't want to use spark plug wires?

Does that sum everything up?
Did I miss anything?


-Ted

[chibikougan]

http://www.rx7club.com/3rd-generatio...-packs-864760/


I believe you have to cut down the spark plug also.


Need a trigger and something to drive 4 2 wire coils.


Build a custom mount.


Good Luck

[sen2two]

Originally Posted by RETed

Let me get this straight...

You want to mount your coils onto something other than directly onto the engine / spark plugs?

You don't want to use spark plug wires?

Does that sum everything up?
Did I miss anything?


-Ted

I just tried to draw it up in SolidWorks so I can post a 3d rendering, but of course the program is giving me an error. pictures are worth a thousand words, and even more in this scenario.


What I am trying to do is, make a mount that will be attached to the engine. This mount will hold the coils/igniters directly in front of the spark plugs also acting as a heat sink. The spark plugs will be connected directly to the coils through a boot that I will make, since I do not believe they make this type of boot.

Please note that this is not for a fuel injection motor. These are 2 Blaster SS coils (8207) using HEI igniters, with a 85 distributor (TFIDFIS). Using with no trailing ignition at all.

[chibikougan]

Did you ask just to tell everyone what you are going to do?

Seems like you have it figured out.

Good luck

[sen2two]

Originally Posted by chibikougan

Did you ask just to tell everyone what you are going to do?

Seems like you have it figured out.

Good luck

I posted thinking that maybe somebody would know where to get one of the boots to mount a coil to a plug. I never asked a question on how to do it or if it would work. Only where to get the part.

[chibikougan]

Here

http://www.google.com/#q=coil+to+plug+boot&tbm=shop