Tegheim - Home made 4 rotor Wolvo 142

N.RotaryTech · 04-27-2014, 05:06 PM

Nice.

Also. Im sure you know what your doing but id like to remind you to check the clearance between the flywheel and the engine studs.

Tegheim · 06-21-2014, 08:39 AM

Just because it's quiet, doesn't mean it's dead

My old teacher called, he had found my website, and wanted to show his friends my build in person. Really fun! Cleaned up and made some coffee.

Have been thinking about the intake, and have some ideas of how it will be.

I want thin throttlebodys with no injectors, and also buttefly model.
Something like this...

Started on a prototype of aluminium...

The P-Port-inserts will have V-band to connect the runners, but I wanted a personal touch also.

This is how the billet stainless v-band-clamps turned out today. Really happy with them.

Tegheim · 07-08-2014, 01:33 AM

chibikougan · 07-08-2014, 02:20 AM

Moar!

Tegheim · 07-08-2014, 11:25 PM

Got up early today again. Lovely to start the day with some Engine-stuff...

chibikougan · 07-08-2014, 11:48 PM

Please sir may I have another!

04-27-2014, 05:06 PM	#1
N.RotaryTech Home-brew Rotary Join Date: Feb 2008 Location: GooseCreek SC Posts: 552 Rep Power: 18	Nice. Also. Im sure you know what your doing but id like to remind you to check the clearance between the flywheel and the engine studs. __________________ '89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily.

06-21-2014, 08:39 AM	#2
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Just because it's quiet, doesn't mean it's dead My old teacher called, he had found my website, and wanted to show his friends my build in person. Really fun! Cleaned up and made some coffee. Have been thinking about the intake, and have some ideas of how it will be. I want thin throttlebodys with no injectors, and also buttefly model. Something like this... Started on a prototype of aluminium... The P-Port-inserts will have V-band to connect the runners, but I wanted a personal touch also. This is how the billet stainless v-band-clamps turned out today. Really happy with them.

07-08-2014, 01:33 AM	#3
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15

07-08-2014, 11:25 PM	#5
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Got up early today again. Lovely to start the day with some Engine-stuff...