Tegheim - Home made 4 rotor Wolvo 142

Tegheim · 03-25-2014, 11:11 AM

Not much is happening at the moment.

I shortened my steering rack at last. Cut 220mm of an let 200mm be left.

Took some M24-nuts and machined out the threads. Then put them over my 4-link rods for adjustments later on. Just a little work with the TIG, and they are ready for some paint.

Are going with these 15.99mm solid dowels straight through the engine. Better off than the OEM.

03-25-2014, 11:11 AM	#24
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	Not much is happening at the moment. I shortened my steering rack at last. Cut 220mm of an let 200mm be left. Took some M24-nuts and machined out the threads. Then put them over my 4-link rods for adjustments later on. Just a little work with the TIG, and they are ready for some paint. Are going with these 15.99mm solid dowels straight through the engine. Better off than the OEM.