Please help diagnose coolant & oil pooling on LIM

$100T2 · 06-07-2008, 06:15 PM

That same thing happened to me when I swapped to my RB turbo-back exhaust. Turned out I had inadvertently loosed a bolt on the block. Tighten everything around there, see if that cures your problem.

nitronatefc · 06-07-2008, 06:28 PM

I am going back to make sure the LIM to engine bolts are tight. Since both vacuum nipples mentioned previoulsy were fine, it seems it has to be from this area. This still doesn't explain the oil though...

06-07-2008, 06:15 PM	#1
$100T2 Big Daddy Join Date: Feb 2008 Location: Rhode Island Posts: 419 Rep Power: 18	That same thing happened to me when I swapped to my RB turbo-back exhaust. Turned out I had inadvertently loosed a bolt on the block. Tighten everything around there, see if that cures your problem. __________________ Hell hath no fury like a rotor blown.

06-07-2008, 06:28 PM	#2
nitronatefc less roof, more turbo... Join Date: Jun 2008 Location: Stevens Point, WI Posts: 25 Rep Power: 0	I am going back to make sure the LIM to engine bolts are tight. Since both vacuum nipples mentioned previoulsy were fine, it seems it has to be from this area. This still doesn't explain the oil though...