Thinking of going e-fan

[Pete_89T2]

Well folks, I decided to scrap the e-fan project and ordered a new fan clutch from Rockauto. Good thing I did, because I got the last one they had on wholesaler closeout for $39, and when that one sold, they jacked the price up to $169!

Anyway, my primary motivation for going e-fan was to clean up the engine bay and improve maintainability/access. The problem is that when you have a thicker than stock aftermarket radiator, the stock fan & shroud become a PITA to R&R when you use all the stock fastener points for the shroud like I did. The thought occurred to me that if I modify the stock shroud mounting points (i.e., relocate some, make all fasteners easier to get to), I could make it a lot easier to R&R the shroud & fan when needed. More to follow if I figure this out.

[GySgtFrank]

Originally Posted by Pete_89T2

Well folks, I decided to scrap the e-fan project and ordered a new fan clutch from Rockauto. Good thing I did, because I got the last one they had on wholesaler closeout for $39, and when that one sold, they jacked the price up to $169!

Anyway, my primary motivation for going e-fan was to clean up the engine bay and improve maintainability/access. The problem is that when you have a thicker than stock aftermarket radiator, the stock fan & shroud become a PITA to R&R when you use all the stock fastener points for the shroud like I did. The thought occurred to me that if I modify the stock shroud mounting points (i.e., relocate some, make all fasteners easier to get to), I could make it a lot easier to R&R the shroud & fan when needed. More to follow if I figure this out.

IMO You're much better off staying with the mechanical fan if you can. As Ted says, electric fans fail, ...regularly. Usually if the mechanical fan quits turning so does the engine, no problems. The V-mount bubbas just haz ta take their chances.