FS: JKL Racing Engineering Demo Car

mdude · 05-28-2008, 10:01 AM

Car has barely moved in the past 2 years so I still have the compression test done by Rick's Rotary in Pleasanton. Car doesn’t smoke at idle and compression was good when I bought the car.

116k on the chassis
20k on rebuilt motor
99 spec turbos – less than 10,000 km
Garfinkle Oil pan Brace
Noltec Motor Mounts – less than 400 miles
R1 dual oil coolers with new hardlines, washers and gaskets - less than 500 miles

Performance-
Racing beat dual tip cat back exhaust
SMB 3” metallic substrate cat – less than 2k miles
RX7- Fashion downpipe
M2 Large Intercooler
M2 Carbon Fiber intake box with 2 sets of filter
HKS twin power
Greddy Pullies
Apex Power FC w/ commander and FC- Datalogit
Blitz SBC –I Color
Koyo radiator
Defi BF white boost gauge – in bar
Defi Link Unit
Supra fuel pump
Hyperion fuel surge cover

Suspension
Delrin bushings – less than 1k miles
Aragosta Coilovers with 12kg/10kg front and rear – less than 10,000km
Garfinkle Engine torque brace – less than 300 miles
Widefoot sway bar mounts and Bronze bushing kit- less than 300 miles
Tri Point Engineering Adjustable sway bar
93 Stock Rims – 16x8 with bridgestone re750 potenzas

Interior

Car was tan originally but I converted to black. It has brand new sun visors and headliner. It also has a glass moonroof with the black panel that goes underneath. The car will also come with jdm rear seats. It has base seats out of a 30k mile car that are in great condition. The only thing that it needs is black carpet. Door panels and kick panels have already been converted.

The car also comes with 94/95 textured interior plastics (Gauge cluster and hood, shifter console, A/C panel, driver side and passenger side plastics). These will not peel like the 93 interior plastics. Also the map pocket is brand new and is in working condition. Sprit R shift knob , Flying M steering Wheel, and jdm armrest

Car also comes with a Alpine CD deck with an Ipod adaptor

Here is the bad –
Exterior
Paint chips along the car
The driver side door has a lot paint chips on the door panel
There are dings on the door but I will have these fixed. – Car should be painted
(Car can be painted at buyer’s expense for a very good price since I know a few shops that do a good job)

Transmission – grinds through 1-3 gear

If the buyer pays my asking my price or close to it, Here is what I will also include

Brand New 94/95 gauge cluster and hood
Brand New 94/95 shifter console
Used 94/95 A/C Panel
Brand New Racelogic Traction Control with digital adjuster
Brand New Black Scuff Plates
Brand New Exedy Hyper Single Clutch w/40k tranny- this will be installed for the buyer, along with all new seals and bearings for the clutch install
Brand New Defi BF White Oil temp gauge
Brand New Defi BF White Water Temp Gauge
Brand New Re-Speed Oil pedestal
Brand New 99 spec OEM front bumper
Brand New 99 spec OEM Rebar
Brand New 99 spec OEM Turn Signals with Knightsport Harness
Brand New 99 spec OEM oil cooler ducts
Brand New 99 spec OEM Air Guide
Brand New 99 spec OEM front lip
Brand New Front and rear OEM Mudguards
Brand New JKL Racing Engineering Aluminum Door Handles
Brand New JKL Racing Engineering Carbon Fiber Bumper Guard
Used Mazdaspeed Short Shifter
2 1300cc injectors that have been cleaned and flowtested
Used Efini Y pipe with gaskets – 10,000km

I will also include all the stock parts and take care of smog for the buyer. Looking for 21K obo. If I don’t get what I want, I will start parting.

If you have any questions pm me or email me at jklracingengineering@gmail.com. thanks

Pictures will be up very soon

dregg100 · 05-28-2008, 10:15 AM

lmk when you start parting please!

bbade · 06-05-2008, 10:22 AM

If you decide to part I am very interested!

manveru · 06-05-2008, 04:46 PM

ima vulture too, let us know when the parts feast begins.

edit: can we call dibs? if so, then dibs on the twin power(with harness?)

Phoenix7 · 06-05-2008, 04:53 PM

well, I'm interested in the "shops" you recommend for body and paint. I'm looking to get help with my front bumper and paint so getting pointed in the right direction would be awesome.

http://rotarycarclub.com/showthread.php?t=1644

IF you part I'd be interested in oil cooler and injectors. Good luck and thanks in advance.

05-28-2008, 10:01 AM	#1
mdude Rotary Fan in Training Join Date: Feb 2008 Location: Bay Area iTrader: (2) Posts: 43 Rep Power: 0	FS: JKL Racing Engineering Demo Car - 93 VR Touring Car has barely moved in the past 2 years so I still have the compression test done by Rick's Rotary in Pleasanton. Car doesn’t smoke at idle and compression was good when I bought the car. 116k on the chassis 20k on rebuilt motor 99 spec turbos – less than 10,000 km Garfinkle Oil pan Brace Noltec Motor Mounts – less than 400 miles R1 dual oil coolers with new hardlines, washers and gaskets - less than 500 miles Performance- Racing beat dual tip cat back exhaust SMB 3” metallic substrate cat – less than 2k miles RX7- Fashion downpipe M2 Large Intercooler M2 Carbon Fiber intake box with 2 sets of filter HKS twin power Greddy Pullies Apex Power FC w/ commander and FC- Datalogit Blitz SBC –I Color Koyo radiator Defi BF white boost gauge – in bar Defi Link Unit Supra fuel pump Hyperion fuel surge cover Suspension Delrin bushings – less than 1k miles Aragosta Coilovers with 12kg/10kg front and rear – less than 10,000km Garfinkle Engine torque brace – less than 300 miles Widefoot sway bar mounts and Bronze bushing kit- less than 300 miles Tri Point Engineering Adjustable sway bar 93 Stock Rims – 16x8 with bridgestone re750 potenzas Interior Car was tan originally but I converted to black. It has brand new sun visors and headliner. It also has a glass moonroof with the black panel that goes underneath. The car will also come with jdm rear seats. It has base seats out of a 30k mile car that are in great condition. The only thing that it needs is black carpet. Door panels and kick panels have already been converted. The car also comes with 94/95 textured interior plastics (Gauge cluster and hood, shifter console, A/C panel, driver side and passenger side plastics). These will not peel like the 93 interior plastics. Also the map pocket is brand new and is in working condition. Sprit R shift knob , Flying M steering Wheel, and jdm armrest Car also comes with a Alpine CD deck with an Ipod adaptor Here is the bad – Exterior Paint chips along the car The driver side door has a lot paint chips on the door panel There are dings on the door but I will have these fixed. – Car should be painted (Car can be painted at buyer’s expense for a very good price since I know a few shops that do a good job) Transmission – grinds through 1-3 gear If the buyer pays my asking my price or close to it, Here is what I will also include Brand New 94/95 gauge cluster and hood Brand New 94/95 shifter console Used 94/95 A/C Panel Brand New Racelogic Traction Control with digital adjuster Brand New Black Scuff Plates Brand New Exedy Hyper Single Clutch w/40k tranny- this will be installed for the buyer, along with all new seals and bearings for the clutch install Brand New Defi BF White Oil temp gauge Brand New Defi BF White Water Temp Gauge Brand New Re-Speed Oil pedestal Brand New 99 spec OEM front bumper Brand New 99 spec OEM Rebar Brand New 99 spec OEM Turn Signals with Knightsport Harness Brand New 99 spec OEM oil cooler ducts Brand New 99 spec OEM Air Guide Brand New 99 spec OEM front lip Brand New Front and rear OEM Mudguards Brand New JKL Racing Engineering Aluminum Door Handles Brand New JKL Racing Engineering Carbon Fiber Bumper Guard Used Mazdaspeed Short Shifter 2 1300cc injectors that have been cleaned and flowtested Used Efini Y pipe with gaskets – 10,000km I will also include all the stock parts and take care of smog for the buyer. Looking for 21K obo. If I don’t get what I want, I will start parting. If you have any questions pm me or email me at jklracingengineering@gmail.com. thanks Pictures will be up very soon Last edited by mdude; 05-28-2008 at 10:05 AM..

05-28-2008, 10:15 AM	#2
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	lmk when you start parting please! __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

06-05-2008, 10:22 AM	#3
bbade Rotary Fanatic Join Date: Mar 2008 Location: Macungie, PA iTrader: (0) Posts: 163 Rep Power: 17	If you decide to part I am very interested! __________________ Proud owner of a base 1993 Montego Blue FD. PFC, RB single tip, Koyo Radiator, KDR rebuilt motor, polished OEM front strut bar, FEED replica sideskirts, OEM 99 spec rear spoiler, SuperPro Bushings Many thanks to Dave at KDR for sparking my rotor addiction.

06-05-2008, 04:46 PM	#4
manveru The Newbie Join Date: Feb 2008 iTrader: (0) Posts: 19 Rep Power: 0	ima vulture too, let us know when the parts feast begins. edit: can we call dibs? if so, then dibs on the twin power(with harness?) __________________ 95 MBM- T04R 97 Grand Cherokee- FS, $4500, pm me. Also have FC/FD turbo goodies for sale, pm me. Last edited by manveru; 06-05-2008 at 04:51 PM..