Bleeding/flushing fluid in clutch lines

WankelsRevenge · 08-13-2013, 03:17 PM

Thankfully I have a vaccum bleeder so all the pumping wont be necessary. Any idea where I can find the bleeder screw at though? I looked around all under the car and couldnt find it.

JL1RX7 · 08-13-2013, 03:28 PM

Look next to the oil filter. The slave is right there. It should be right on the other side of the hose. Follow the lines from the M/C and you will see it. It isn't too hard to get to and get a hose and I think it's a 8mm wrench on the bleed screw.

Pete_89T2 · 08-13-2013, 05:20 PM

^What he said. If you have a T2 with the stock top mount IC, the job is much easier if you remove the IC first.

08-13-2013, 03:28 PM	#2
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA Posts: 487 Rep Power: 18	Look next to the oil filter. The slave is right there. It should be right on the other side of the hose. Follow the lines from the M/C and you will see it. It isn't too hard to get to and get a hose and I think it's a 8mm wrench on the bleed screw.

08-13-2013, 05:20 PM	#3
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD Posts: 874 Rep Power: 16	^What he said. If you have a T2 with the stock top mount IC, the job is much easier if you remove the IC first.