Stredrotor's RX4 Coupe * Project 20B *

Stredrotor · 06-16-2013, 01:58 AM

Just for interest, this is the difference between my old SV RX7 box and the TKO.

670mm Vs 730mm from belhousing face to shifter position. The RX7 box I had already done the shortened shifter housing mod.

Stredrotor · 06-30-2013, 05:47 AM

I put the TKO on the back of the 20B today and dropped them into the engine bay to measure up the gearbox cross member.
Sorry I don't have any pics at the moment as the missus is away and she took the camera and my phone is no better than a potato.

The TKO fits the RX4 transmission tunnel very well and shouldn't need any "clearancing".

I have measured up and modeled the gearbox cross member.

Turns out to only need a very simple design

.

06-16-2013, 01:58 AM	#1
Stredrotor Rotary Fan in Training Join Date: Nov 2009 Location: Tasmania, Australia Posts: 53 Rep Power: 16	Just for interest, this is the difference between my old SV RX7 box and the TKO. 670mm Vs 730mm from belhousing face to shifter position. The RX7 box I had already done the shortened shifter housing mod. __________________ RX4 coupe 20B conversion http://www.rotarycarclub.com/rotary_...ead.php?t=9884

06-30-2013, 05:47 AM	#2
Stredrotor Rotary Fan in Training Join Date: Nov 2009 Location: Tasmania, Australia Posts: 53 Rep Power: 16	I put the TKO on the back of the 20B today and dropped them into the engine bay to measure up the gearbox cross member. Sorry I don't have any pics at the moment as the missus is away and she took the camera and my phone is no better than a potato. The TKO fits the RX4 transmission tunnel very well and shouldn't need any "clearancing". I have measured up and modeled the gearbox cross member. Turns out to only need a very simple design . __________________ RX4 coupe 20B conversion http://www.rotarycarclub.com/rotary_...ead.php?t=9884