|
Rotary Tech - General Rotary Engine related tech section.. Tech section for general Rotary Engine... This includes, building 12As, 13Bs, 20Bs, Renesis, etc... |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
The Newbie
Join Date: Feb 2012
Posts: 18
Rep Power: 0 ![]() |
I've managed to get up to 40.5psi so far, still on 98 octane pump fuel (93 octane USA) and water injection. Still running inductive ignition and $3 sparkplugs with a massive 60" plug gap with no sign of misfire. The dyno says 740rwhp at 38psi. Whether it's accurate or not at that hp level I don't know. What I do know is that 40.5psi from a 75mm turbo is a fair amount of power. Enough to trap almost 156mph on the 1/4 mile anyway. I'll be going back on the dyno soon to try another couple of ideas I have, and probably more boost. It's at the point of diminished returns now though, we're almost out of compressor and I believe the turbine is starting to choke now also. We'll be fitting a larger turbo in the off season I think. Still sticking with the Series 5 engine/intake (TII) at this point.
Last edited by PSI; 03-30-2013 at 03:55 AM. |
![]() |
![]() |
![]() |
#2 | |
Don Mega
Join Date: Dec 2008
Location: Utopia
Posts: 1,688
Rep Power: 18 ![]() |
Quote:
![]()
__________________
www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|