|
|||||||
| RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
|
|
Thread Tools | Display Modes |
|
|
03-25-2013, 04:34 PM
|
#1 |
|
Rawr Bearclaw
Join Date: Feb 2008
Location: The Souf
Posts: 197
Rep Power: 18  |
Find the diagnostic connector under the hood.
IIRC, you run a test wire from the fuel pump pin to ground. If you look on the underside of the cap for the connector, you'll see abbreviations for the pins. Fuel pump is FP, ground is GND. Make sure the ignition is turned on otherwise the fuel pump relay will not power the pump.
__________________
Illicit Performance Rotary building, porting, tuning, chassis dyno services www.illicitperformance.com |
|
|
|
| Bookmarks |
|
|
Hybrid Mode
