Interest in another run of Garfinkles FD Oil Pan Braces? - Page 4

Therecruiter · 09-14-2012, 06:47 PM

Im Interested in one, do you still have it in stock?
Please post pictures of the set

Garfinkles Motor Works · 09-14-2012, 09:46 PM

Therecruiter I do not have any in stock

I am having another batch of 28 units made and about 20 are spoken for.
If you need one there should be one for you. They should be ready soon. I will check on them next week. Everything else is ready to go .

Garfinkles Motor Works · 09-14-2012, 09:49 PM

Does any one have pictures of the Garfinkle brace taken during your build.The only two braces I have are on my cars and I can not get good pictures showing the groove and fit .

Fendamonky · 09-17-2012, 05:33 PM

Quote:

Originally Posted by LongRX7

Is this oil pan brace compatible with the Pineapple racing oil pan? Or would it be over kill have height clearance issue? Thanks.

You're talking about the Excessive Aluminum Oil Pan, right?

Honestly I'm not sure on the height clearance issues, or if the excessive unit has similar ridge patterns to the stock pan.

As far as height issues, you could potentially adjust your engine mounts to compensate, depending on what you're using.

Quote:

Originally Posted by Therecruiter

Please post pictures of the set

Quote:

Originally Posted by Garfinkles Motor Works

Does any one have pictures of the Garfinkle brace taken during your build.The only two braces I have are on my cars and I can not get good pictures showing the groove and fit .

I don't have any from MY build, but I stole some old pics from this forum and the 7club. Here ya go =)

Garfinkles Motor Works · 09-17-2012, 08:59 PM

Wow great pictures I think I will buy one to hang on the wall .Thanks for the pictures .

Garfinkles Motor Works · 09-24-2012, 08:36 AM

Here is the last info 9-24 -2012 ,I am going this morning to get the cut parts and take them to the other shop for milling,Several hours for me .The milling shop said I SHOULD be able to pick them up on Friday .The people who have prepayed will have the parts shipped Friday afternoon or Saturday morning If they are ready Friday . Start sending your payment if you wish . Thanks to all ;David

RX7 RAGE · 09-25-2012, 08:15 AM

I sent payment, thanks.

xIceHoundx · 09-25-2012, 08:44 AM

these still available? I just seen this posted up on FB and am interested in one for myself, and also if available I will need it shipped to a Germany APO address (military)

theorie · 09-25-2012, 09:50 AM

Quote:

Originally Posted by xIceHoundx

these still available? I just seen this posted up on FB and am interested in one for myself, and also if available I will need it shipped to a Germany APO address (military)

Yes, I'm interested as well. Is it too late or not? I want to order one, shipped to 34231.

Garfinkles Motor Works · 09-25-2012, 02:34 PM

There will be several more then spoken for .I am sending them out as they are paid for so everyone who pays will be satisfied .

Shmacklepap · 09-25-2012, 03:51 PM

I'm very interested in one as well. I'll take one if/when available

Garfinkles Motor Works · 09-26-2012, 10:45 PM

I have all the prepaid packages addressed and ready to go as soon as the machine shop calls .They think that will be Friday ,9-28-2012.I am shipping the orders first paid first shipped Do not sleep through this .When the part are in my hand I will start calling the people on the list that have not paided.Keep you fingers crossed for Friday .

Garfinkles Motor Works · 09-27-2012, 10:27 PM

The last machine shop said today that the braces should be ready Friday and I should call them early afternoon .The trip to get them will take about 2 1/2 hours .I will start shipping the prepaid orders if the post office is open after I tape up the packages . I will be shipping them as they are paid for after the first group goes out .

Fendamonky · 09-27-2012, 10:38 PM

Awesome, thanks for making another run of these braces David. You're the man!

Garfinkles Motor Works · 09-28-2012, 12:35 AM

There is alot of stress for me to sell something that I do not have in my hands ready to ship.All my customers know I ship quickly an need every customer to be satisfied with anything I make .These braces are the only thing I sell that involves other venders .I will be happy after all orders are filled .

09-14-2012, 09:46 PM	#47
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Therecruiter I do not have any in stock I am having another batch of 28 units made and about 20 are spoken for. If you need one there should be one for you. They should be ready soon. I will check on them next week. Everything else is ready to go . Last edited by ZGN; 09-25-2012 at 02:08 PM. Reason: for clarification

09-25-2012, 08:44 AM	#53
xIceHoundx So Fresh Join Date: Feb 2012 Location: Topeka, KS Posts: 27 Rep Power: 0	these still available? I just seen this posted up on FB and am interested in one for myself, and also if available I will need it shipped to a Germany APO address (military) __________________ SO FRESH

09-14-2012, 06:47 PM	#46
Therecruiter The Newbie Join Date: Sep 2012 Posts: 3 Rep Power: 0	Im Interested in one, do you still have it in stock? Please post pictures of the set

09-14-2012, 09:49 PM	#48
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Does any one have pictures of the Garfinkle brace taken during your build.The only two braces I have are on my cars and I can not get good pictures showing the groove and fit .

09-17-2012, 08:59 PM	#50
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Wow great pictures I think I will buy one to hang on the wall .Thanks for the pictures .

09-24-2012, 08:36 AM	#51
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Here is the last info 9-24 -2012 ,I am going this morning to get the cut parts and take them to the other shop for milling,Several hours for me .The milling shop said I SHOULD be able to pick them up on Friday .The people who have prepayed will have the parts shipped Friday afternoon or Saturday morning If they are ready Friday . Start sending your payment if you wish . Thanks to all ;David

09-25-2012, 08:15 AM	#52
RX7 RAGE The Newbie Join Date: Mar 2008 Location: San Diego, CA Posts: 27 Rep Power: 0	I sent payment, thanks.

09-25-2012, 02:34 PM	#55
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	There will be several more then spoken for .I am sending them out as they are paid for so everyone who pays will be satisfied .

09-25-2012, 03:51 PM	#56
Shmacklepap The Newbie Join Date: Jun 2010 Posts: 1 Rep Power: 0	I'm very interested in one as well. I'll take one if/when available

09-26-2012, 10:45 PM	#57
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I have all the prepaid packages addressed and ready to go as soon as the machine shop calls .They think that will be Friday ,9-28-2012.I am shipping the orders first paid first shipped Do not sleep through this .When the part are in my hand I will start calling the people on the list that have not paided.Keep you fingers crossed for Friday .

09-27-2012, 10:27 PM	#58
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	The last machine shop said today that the braces should be ready Friday and I should call them early afternoon .The trip to get them will take about 2 1/2 hours .I will start shipping the prepaid orders if the post office is open after I tape up the packages . I will be shipping them as they are paid for after the first group goes out .

09-28-2012, 12:35 AM	#60
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	There is alot of stress for me to sell something that I do not have in my hands ready to ship.All my customers know I ship quickly an need every customer to be satisfied with anything I make .These braces are the only thing I sell that involves other venders .I will be happy after all orders are filled .