Fuel pump bulkhead connector re-wire

mazpower · 05-02-2012, 05:26 PM

Get a multipin connector and dedicate 4 pins to 12+ and ground, two per each to distribute the load. That way you can get away with smaller pins and thinner gauge requirements for those pins.

infernosg · 05-03-2012, 08:10 AM

Quote:

Originally Posted by mazpower

Get a multipin connector and dedicate 4 pins to 12+ and ground, two per each to distribute the load. That way you can get away with smaller pins and thinner gauge requirements for those pins.

Great idea. I don't know why I didn't think of this...

05-02-2012, 05:26 PM	#1
mazpower Rawr Bearclaw Join Date: Feb 2008 Location: The Souf Posts: 197 Rep Power: 18	Get a multipin connector and dedicate 4 pins to 12+ and ground, two per each to distribute the load. That way you can get away with smaller pins and thinner gauge requirements for those pins. __________________ Illicit Performance Rotary building, porting, tuning, chassis dyno services www.illicitperformance.com