DGRR 2012 To Do List

[Rotorypolo]

To do list on 94 (friend's car)
-remove old engine- tranny, drop in new engine - tranny - done long time ago
-convert old single setup to simplified seq. setup - done
-put in new stock turbos - done
-blew stock twins on dyno ( bad turbo from ebay!) cough cough
-install new GT35R turbo / convert to single, etc etc - done
-install shitty ebay intercooler - done
-dyno tune on shitty chinese IC - done (found exhaust leak and major heat soak)
-install new coilover suspension - done
-install new fuel pump and fix floater - done
-install short shifter - done
-fix exhaust leak- done
-reroute waste gate open dump - done
-install new cat-back exhaust - done
-new 1.06 hot side - done
-new V-mount IC setup - done
-fix minor vacuum leaks - done
-new injector resistors & wiring - done
-a good tuning - done (FINALLY)
-install and wired up new water temp gauge - done
-fix injector leaks - done
-install new front rotors and pads - done
-change plugs - done
-fix broken door locks, handles, etc. - done
-retrofit projector HID headlight - done
relocate battery to rear - done

Still to do list
-install rear rotors and pads
-install alum. AST
-new paint job
-cut stock hood, install hood vents
-install Mazdaspeed GTC front
-install remote entry
-sound system/headunits
-NEVERENDING maintenance, and upgrade

[Sephitrask]

Originally Posted by Rotorypolo

To do list on 94 (friend's car)
-remove old engine- tranny, drop in new engine - tranny - done long time ago
-convert old single setup to simplified seq. setup - done
-put in new stock turbos - done
-blew stock twins on dyno ( bad turbo from ebay!) cough cough
-install new GT35R turbo / convert to single, etc etc - done
-install shitty ebay intercooler - done
-dyno tune on shitty chinese IC - done (found exhaust leak and major heat soak)
-install new coilover suspension - done
-install new fuel pump and fix floater - done
-install short shifter - done
-fix exhaust leak- done
-reroute waste gate open dump - done
-install new cat-back exhaust - done
-new 1.06 hot side - done
-new V-mount IC setup - done
-fix minor vacuum leaks - done
-new injector resistors & wiring - done
-a good tuning - done (FINALLY)
-install and wired up new water temp gauge - done
-fix injector leaks - done
-install new front rotors and pads - done
-change plugs - done
-fix broken door locks, handles, etc. - done
-retrofit projector HID headlight - done
relocate battery to rear - done

Still to do list
-install rear rotors and pads
-install alum. AST
-new paint job
-cut stock hood, install hood vents
-install Mazdaspeed GTC front
-install remote entry
-sound system/headunits
-NEVERENDING maintenance, and upgrade

interested in the "cut stock hood install hood vents" part. what vents are you using, and do you have any pictures of your idea?