My '76 Rx-4 hardtop build.

Buggy · 02-26-2012, 08:33 AM

I made the trip to see Sam at ReSpeed yesterday and picked up all of the parts for the front suspension. Hopefully today with some luck I will get the front suspension and brakes together. I also took apart all of the exterior gauges and cleaned/polished them. I've tweaked the carburetor a little more and I upgraded my screens on the velocity stacks. I've also finally bought MSD coils and I made a proper bracket to hold all 3 coils together. No more zip ties!

I'll try and take some pictures today to show you guys the mess in my garage.

02-26-2012, 08:33 AM	#1
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada Posts: 260 Rep Power: 16	I made the trip to see Sam at ReSpeed yesterday and picked up all of the parts for the front suspension. Hopefully today with some luck I will get the front suspension and brakes together. I also took apart all of the exterior gauges and cleaned/polished them. I've tweaked the carburetor a little more and I upgraded my screens on the velocity stacks. I've also finally bought MSD coils and I made a proper bracket to hold all 3 coils together. No more zip ties! I'll try and take some pictures today to show you guys the mess in my garage. __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place