D series 20B engine from cosmo half cut for sale

Jetlude · 11-09-2011, 05:27 PM

Got this engine which I planned to put in my FD but I am embarking on a 2JZ project instead, so I am selling. Its a D series 20B I can post pictures if needed. This engine has never been opened, but should be in good condition. All apex seals look intact when viewed through exhaust ports, and makes decent compression on each rotor face when cranked by hand.

Price $5000.00 OBO.
I also have a FD gearbox from Japan to mate with this engine if needed.

A trade for a 2JZ engine with tranny will be considered.

speedjunkie · 11-09-2011, 07:37 PM

Damn this is so tempting...as long as I can still get this 240Z for $100 lol.

Jetlude · 11-13-2011, 09:28 PM

Pictures

Click on the pics

Bryan@BNR · 11-13-2011, 11:50 PM

I have a low mile 2jz with turbo manifold. Also with a A340E bell housing so you could do a domestic TH400 or glide. I can throw in a PT71 billet Single turbo as well.

Jetlude · 11-16-2011, 08:33 AM

Quote:

Originally Posted by Bryan@BNR

I have a low mile 2jz with turbo manifold. Also with a A340E bell housing so you could do a domestic TH400 or glide. I can throw in a PT71 billet Single turbo as well.

PM sent

Bryan@BNR · 11-16-2011, 11:53 AM

pics of jz

Jetlude · 11-18-2011, 05:09 PM

Will take $4000

WE3RX7 · 11-19-2011, 09:48 AM

Where are you located?

***TitaniumTT*** · 11-19-2011, 05:05 PM

Unless it's something related to the sale, the post is useless and will be deleted

Jetlude · 11-30-2011, 02:15 PM

Still got this thing..... will take $3750 and you pay for shipping.

***TitaniumTT*** · 11-30-2011, 05:54 PM

Where are you located?

Jetlude · 12-01-2011, 08:23 AM

Quote:

Originally Posted by TitaniumTT

Where are you located?

I am located in the Caribbean

Jetlude · 12-13-2011, 09:19 AM

Bump for a Clean D series 20B straight out of Japan. Will take $3500 OBO. Ready to get this thing out of my garage.

Jetlude · 01-19-2012, 06:38 PM

Current price 3000 + shipping

Jetlude · 01-28-2012, 09:38 PM

Sold

11-09-2011, 05:27 PM	#1
Jetlude The Newbie Join Date: Dec 2009 Posts: 13 Rep Power: 0	D series 20B engine from cosmo half cut for sale Got this engine which I planned to put in my FD but I am embarking on a 2JZ project instead, so I am selling. Its a D series 20B I can post pictures if needed. This engine has never been opened, but should be in good condition. All apex seals look intact when viewed through exhaust ports, and makes decent compression on each rotor face when cranked by hand. Price $5000.00 OBO. I also have a FD gearbox from Japan to mate with this engine if needed. A trade for a 2JZ engine with tranny will be considered.

11-13-2011, 11:50 PM	#4
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 Posts: 302 Rep Power: 18	I have a low mile 2jz with turbo manifold. Also with a A340E bell housing so you could do a domestic TH400 or glide. I can throw in a PT71 billet Single turbo as well. Last edited by Bryan@BNR; 11-14-2011 at 02:56 PM.

11-19-2011, 05:05 PM	#9
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Unless it's something related to the sale, the post is useless and will be deleted __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-30-2011, 05:54 PM	#11
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Where are you located? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-09-2011, 07:37 PM	#2
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Damn this is so tempting...as long as I can still get this 240Z for $100 lol.

11-13-2011, 09:28 PM	#3
Jetlude The Newbie Join Date: Dec 2009 Posts: 13 Rep Power: 0	Pictures Click on the pics

11-18-2011, 05:09 PM	#7
Jetlude The Newbie Join Date: Dec 2009 Posts: 13 Rep Power: 0	Will take $4000

11-19-2011, 09:48 AM	#8
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Where are you located?

11-30-2011, 02:15 PM	#10
Jetlude The Newbie Join Date: Dec 2009 Posts: 13 Rep Power: 0	Still got this thing..... will take $3750 and you pay for shipping.

12-13-2011, 09:19 AM	#13
Jetlude The Newbie Join Date: Dec 2009 Posts: 13 Rep Power: 0	Bump for a Clean D series 20B straight out of Japan. Will take $3500 OBO. Ready to get this thing out of my garage.

01-19-2012, 06:38 PM	#14
Jetlude The Newbie Join Date: Dec 2009 Posts: 13 Rep Power: 0	Current price 3000 + shipping

01-28-2012, 09:38 PM	#15
Jetlude The Newbie Join Date: Dec 2009 Posts: 13 Rep Power: 0	Sold