Nikki Question

[one320fc]

Originally Posted by Rich@SR

No kit that i'm aware of come with the screens and in my opinion it's ok to not replace them if you have an inline filter. Otherwise just clean the old ones in some parts cleaner and put them back in. Also my personal choice is the GP Sorenson kit from autozone. Compaired to other kits I've purchased... some twice the price... it's the best one. Just make sure you get the one that comes with the check balls, it's like 3 bucks more.

yea I would like to have a filter at the carb, any chance on getting the info on the Jegs unit on your carb? Not looking for any trade secrets but looks pretty good!

[Rich@SR]

Originally Posted by one320fc

yea I would like to have a filter at the carb, any chance on getting the info on the Jegs unit on your carb? Not looking for any trade secrets but looks pretty good!

Hey no sweat, not looking to keep trade secrets. I'm happy to share info. My setup uses a 6 AN fitting which I welded onto the stock fuel hard line at the carb.

Mine:
http://www.jegs.com/i/JEGS+Performan...15034/10002/-1

If you don't want to convert to AN fittings you can use this with stock line setup:
http://www.jegs.com/i/JEGS+Performan...15042/10002/-1

Both models utilize a replaceable screen inside for convenience.
http://www.jegs.com/i/JEGS+Performan...15045/10002/-1

[one320fc]

Originally Posted by Rich@SR

Hey no sweat, not looking to keep trade secrets. I'm happy to share info. My setup uses a 6 AN fitting which I welded onto the stock fuel hard line at the carb.

Mine:
http://www.jegs.com/i/JEGS+Performan...15034/10002/-1

If you don't want to convert to AN fittings you can use this with stock line setup:
http://www.jegs.com/i/JEGS+Performan...15042/10002/-1

Both models utilize a replaceable screen inside for convenience.
http://www.jegs.com/i/JEGS+Performan...15045/10002/-1

Thanks for all the info! if my cash flow wasnt a issue I would just be sending you my carb!
Should be trying to put the carb back together this weekend, need to look the carb over real good no check balls came out during tear down and I have new ones that came with my re-build kit..

[Rich@SR]

Originally Posted by one320fc

Thanks for all the info! if my cash flow wasnt a issue I would just be sending you my carb!
Should be trying to put the carb back together this weekend, need to look the carb over real good no check balls came out during tear down and I have new ones that came with my re-build kit..

Hey no sweat, I also offer a machining package for all you DIY'ers who don't have access to a lathe and what not. That way you can still have an SR Nikki, just have to assemble it yourself.