Best place to fit oil/water senders? impressions pros/cons

***TitaniumTT*** · 11-27-2011, 04:27 PM

I went looking for that Depo 4/1 gauge but not seeing it... do you have a part number for it by chance?

If you hook up the illumination to the headlights, you won't be able to adjust the dimness at all, they will either be on or off. And depending on the type of illumination used on the gauge, you might not be able to dim it even iff hooked up to the proper circuit.

Jonathan3009 · 11-27-2011, 04:36 PM

Quote:

Originally Posted by TitaniumTT

I went looking for that Depo 4/1 gauge but not seeing it... do you have a part number for it by chance?

If you hook up the illumination to the headlights, you won't be able to adjust the dimness at all, they will either be on or off. And depending on the type of illumination used on the gauge, you might not be able to dim it even iff hooked up to the proper circuit.

Sure!

they've 4 models...

I have to say i'm happy with that gauge...

returning to my illumination problem.... so, where should i fit my apexi gauge then? it just have 2 wires...

speedjunkie · 11-27-2011, 08:44 PM

Quote:

Originally Posted by TitaniumTT

If you hook up the illumination to the headlights, you won't be able to adjust the dimness at all, they will either be on or off. And depending on the type of illumination used on the gauge, you might not be able to dim it even iff hooked up to the proper circuit.

I had mine hooked up to the dimmer switch before, but they still just went on or off, no adjustment. At least if he has them hooked up to the headlights they will be off during the day and on at night. Where should he connect them otherwise?

Quote:

Originally Posted by Jonathan3009

returning to my illumination problem.... so, where should i fit my apexi gauge then? it just have 2 wires...

So your APEX'i gauge is mechanical? If it only has two wires I would think one is power and one is ground and it's mechanical. What color are the wires? Do you have instructions for hooking it up?

11-27-2011, 04:27 PM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I went looking for that Depo 4/1 gauge but not seeing it... do you have a part number for it by chance? If you hook up the illumination to the headlights, you won't be able to adjust the dimness at all, they will either be on or off. And depending on the type of illumination used on the gauge, you might not be able to dim it even iff hooked up to the proper circuit. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**