For those with IGN-1A's...

infernosg · 10-06-2011, 08:44 AM

I know there are a couple people running these in FC's. I'm trying to mount mine and run all the wires but I'm having difficulty coming up with a good location. I'm curious how everyone has their's mounted.

infernosg · 10-07-2011, 08:26 AM

So no one is running these coils on an FC? Also known as the Mercury Marine coils...

djmtsu · 10-07-2011, 11:42 AM

Isn't Brian running them (TTT)?

C. Ludwig · 10-07-2011, 01:37 PM

I know Bruce mounted them in the stock locations. Two where the leading coil was and two where the trailing were. I prefer to make a bracket to hold all four and hang them off the frame rail. Makes for shorter spark leads.

infernosg · 10-07-2011, 02:23 PM

Quote:

Originally Posted by djmtsu

Isn't Brian running them (TTT)?

I thought he did too but I couldn't find any pictures. I thought Tyler (vex) also had 'em but no luck there either.

Quote:

Originally Posted by C. Ludwig

I know Bruce mounted them in the stock locations. Two where the leading coil was and two where the trailing were.

This was my first thought but I didn't like the idea of the leads running parallel with so many other wires (like the CAS). Still would be the easiest...

Quote:

Originally Posted by C. Ludwig

I prefer to make a bracket to hold all four and hang them off the frame rail. Makes for shorter spark leads.

Something like down at the bottom of the driver's side strut tower in a line? I have to look when I get home as I thought the steering column was in the way.

My other problem is I have no means or ability to weld so my brackets are going to be simple to say the least.

2gslse · 10-07-2011, 04:44 PM

Brian isn't running them he only tested a set on the dyno for a few minutes but never were mounted.

10-06-2011, 08:44 AM	#1
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	For those with IGN-1A's... I know there are a couple people running these in FC's. I'm trying to mount mine and run all the wires but I'm having difficulty coming up with a good location. I'm curious how everyone has their's mounted. __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

10-07-2011, 08:26 AM	#2
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	So no one is running these coils on an FC? Also known as the Mercury Marine coils... __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

10-07-2011, 11:42 AM	#3
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Isn't Brian running them (TTT)? __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

10-07-2011, 01:37 PM	#4
C. Ludwig Rotary Masochist Join Date: May 2008 Location: Floyds Knobs, IN Posts: 494 Rep Power: 18	I know Bruce mounted them in the stock locations. Two where the leading coil was and two where the trailing were. I prefer to make a bracket to hold all four and hang them off the frame rail. Makes for shorter spark leads. __________________ _______________________________________________ *One stop Haltech, AEM, Syvecs shopping. Installation and tuning.* http://www.lms-efi.com *Free support. Drop us an email.* chris@lms-efi.com 502-515-7482 Facebook @LMS-EFI

10-07-2011, 04:44 PM	#6
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	Brian isn't running them he only tested a set on the dyno for a few minutes but never were mounted. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...