|
Defined Autoworks Race prep, Dyno tuning, Rotary Performance, Roll Cage Builds, Unique Fabrication and Transplants |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Rotary Fanatic
|
![]()
Here is our 20B project that we have finished up a few weeks ago. Its taken many hours of custom fabrication, and what we feel is a unique approach to a 42R 20B.
Specs-- --C series 20b, All new rotor housings, dynamically balanced, NRS ceramic apex seals, Race rotor bearings, our own oil/ coolant modifications. Circuit Street Port intake and exhaust. --Exedy triple plate clutch --GT42R turbo --Tial 60mm wastegate --Electromotive Tec3R ecu --Electromotive inductive coils --D.A. custom turbo manifold, 321 stainless --D.A. custom 3.5" downpipe and exhaust 304 stainless --D.A. subframe conversion kit, and modified lower intake --D.A custom intake box and filter --D.A custom intercooler and radiator --D.A custom intercooler pipes --Twin setrab oil coolers --Aeromotive kevlar braided oil lines --Twin supra fuel pumps --Aimsports race dash display --Kaaz limited slip diff Ever since the start of this project, the customer and us wanted it to have a full stock subframe. We also all know how much heat a 20b turbo produces, so a V-mount proved essential. After a lot of fitting and measuring, the GT42R turbo combined with stock subframe, a V-mount, and stock trans location proved very difficult. But with a bit of hard headiness, and creativeness it started to come together smoothly. The end result was worth it, placing the turbo backwards! This makes for much less weight over the front axle as well. A custom air box had to be made, and alot of heat shielding was added anywhere possible. Even with back to back dyno runs, the intake temps never got much above ambient. On the street the coolant and oil temps stay very cool, and after lots of hard abuse, never see much past 90C. The spool-up is great, power is broad to 8500rpm. So far its made 575rwhp at 15psi. Here are the pics! ![]() ![]() ![]() ![]() ![]() ![]() ![]() AIM sports dash display mounted and wired in. This unit is NICE! ![]() Custom undertray. ![]() Dyno charts ![]() ![]() So that is the car, hope you enjoyed it. More pics are in the 20b section.
__________________
DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp |
![]() |
![]() |
![]() |
#2 |
Pirate
|
![]()
Hey, I just saw the vid for this on street fire, the car is sick, I love it!
PS: Is there a reason for leaving the stock cluster behind the race display? Was it cost or were the stock gauges necessary for something?
__________________
Rotaries:They are NOT that complicated! |
![]() |
![]() |
![]() |
#3 |
Rotary Fanatic
|
![]()
Wicked cool!!
__________________
Live the DriFD3S or die trying. JDM True Story. the Vacuum line, to my MAP became detached while I was legally drifting. my engine would not rev past 2500, and idled from 300-650 and was stalling. Fortunately, I acquired a Zip-Tie. I fixed a catastrophic engine failure, With a Zip-Tie. JDM FTW. |
![]() |
![]() |
![]() |
#4 |
RCC Loves Me Not You
|
![]()
A reverse mounted turbo, now there's something you don't see every day LOL. I never could have imagined that actually haha. Is the hood going to be modified with an air vent of some sort for the intake?
And 575hp at 15psi...ho-ly SHIT. Last edited by speedjunkie; 10-05-2011 at 07:15 AM.. |
![]() |
![]() |
![]() |
#5 |
Down with OPP
|
![]()
Holy canolli. That's quite a feat you guys accomplished by keeping the stock subframe. Congratulations. I can't imagine how many man hours and money went into this build.
__________________
86 base, TII swapped, Rtek 2.1, some other things. Daily driven. |
![]() |
![]() |
![]() |
#6 |
Rotary Fanatic
|
![]()
Thanks guys
![]()
__________________
DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp |
![]() |
![]() |