|
RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
|
Thread Tools | Display Modes |
![]() |
#2 |
Home-brew Rotary
Join Date: Feb 2008
Location: GooseCreek SC
Posts: 552
Rep Power: 18 ![]() |
While cleaning it out, I found some strange parts.
![]() Something was even more stranger in the engine bay. ![]() Someone stuffed a Winsor V8 with a ford auto trans in there. Engine was touching the firewall. ![]() The fan was touching the swaybar. ![]() So they tried to figure how to take it off, and opted for cutting it off.? ![]() They actually had this engine and trans bolted in with custom mounts. The trans was touching a section of the tunnel. If this ever ran, I can imagine vibration like crazy. Anyway, I fixed all that, I took it out. Here's the engine compared to a 13b rotary. ![]() The trans that was connected to it. ![]() The firewall damage. ![]() Looks like it was beaten, in some spots. They also cut off the driver side original trans mount. Then something about the front crossmember seemed a bit odd to me. ![]() Is the crossmember backward / turned around? Another angle. ![]() Are all the right holes there?
__________________
'89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily. Last edited by N.RotaryTech; 09-30-2011 at 10:49 AM. |
![]() |
![]() |
Bookmarks |
|
|