Double Din Options

Garfinkles Motor Works · 07-30-2011, 11:03 PM

I stuffed mine with a head unit and made the trim part around it with black plexiglass .You could use the same about 3/16 or 1/4 thick,can not remember and mount it in there so you can take it in and out as needed to add more gages or switches. Make a frame from sheet metal and mount it so the sheet of plexiglass can be mounted to the frame with some small black headed screws, then you can remove it and put it back .Cut and drill several peices so you can try several designs later as your needs change .I bought a small sheet at a plastic supplier in Nashville.

07-30-2011, 11:03 PM	#1
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I stuffed mine with a head unit and made the trim part around it with black plexiglass .You could use the same about 3/16 or 1/4 thick,can not remember and mount it in there so you can take it in and out as needed to add more gages or switches. Make a frame from sheet metal and mount it so the sheet of plexiglass can be mounted to the frame with some small black headed screws, then you can remove it and put it back .Cut and drill several peices so you can try several designs later as your needs change .I bought a small sheet at a plastic supplier in Nashville.