Goopy Performance Stony Point, NY

GoopyPerformance · 12-06-2010, 10:03 PM

Hello

Stopping by to say hello to all Rotary engine enthusiast.
We Manufacture, sell and build Rotary engine parts and accessories specializing in Big horspower drag and road racing applications.

Parts available for 10A, 12A, 13B, 20B & Renesis.
Racing Apex Seals
Corner seals
All springs
All Gaskets
Pulleys,
New & used Rotor housings
New & used Rotors
Oversize main bolts
Oil fill necks
Vacume blocks
Oil Blocks
Pro-Jay intakes & throttle bodies
Clutches
Flanges
Racing Spark plugs
Clerancing kits
Nitrous kits
Etc etc...

We also have repair services such as:

Rotor housing re-surfacing/refreshing
Semi-peripheral housings
Semi-peripheral manifolds
full peripheral housings
12 rotor housing milled from 13B
Spun rotor bearing repair
Lubricity Coatings
Damaged rotor from apex seal of side seal repair
Iron lapping
Crankshaft repair
Short Block Building
Oversize bolt installed
Flywheel repair and resurfacing
FLywheel pinning (older engines)
Media blasting
Fabrication & maching

These are some of our NO-NONSENSE customers....
http://www.goopyperformance.com/content/gallery

See some of this months sales on WLG photo.
http://wljphotography.com/index.html

Se habla espanol!

God Bless

Goopy Performance
Stony Point NY10980
845-947-0007
845-947-0047 fax
Www.GoopyPerformance.com

http://www.youtube.com/watch?v=jYemBRtGP9U
Any questions?

***ZGN*** · 12-07-2010, 01:31 AM

Welcome to the forum. Glad to have you guys on board!

RotorDad · 12-07-2010, 12:27 PM

Welcome to the forum!

GtoRx7 · 12-07-2010, 09:56 PM

I met and talked with Jack (Goopy owner) in person, as they came out and visited us at our shop. Very stand-up company! We were impressed with the products and already using the seals and other parts in recent engine builds. But hey Jack, dont forget to add us on Goopy retailers!

Viperx7 · 12-08-2010, 02:27 PM

Welcome to the Club.

t_g_farrell · 12-16-2010, 05:14 PM

How much to resurface 12A housings? I saw Itos recommendation and am curious.

GoopyPerformance · 12-16-2010, 05:28 PM

Quote:

Originally Posted by t_g_farrell

How much to resurface 12A housings? I saw Itos recommendation and am curious.

$125.00 per pair + shipping.

Please keep in mind that some housings are beyond repair with this method.
But our re-plating will be available by late 2011 So dont throw out any housings.

If you want us to validate a rotor housing prior to shipping it please email us a picture or two to info@goopyperformance.com and give us a little background on the housing ie: overheated, broken apex seal etc.

Innovation never stops..

Goopy Performance

My5ABaby · 12-17-2010, 08:48 AM

So just to clarify because it seems too good, it's $125 +shipping for TWO housings? Does this include 13B housings?

GoopyPerformance · 12-17-2010, 08:55 AM

Quote:

Originally Posted by My5ABaby

So just to clarify because it seems too good, it's $125 +shipping for TWO housings? Does this include 13B housings?

The cost of 2 rotor housings are $125.00 not including shipping.
I have found that us postal will at times allow you to use the large flatrate box but you have to remove the manifold studs so they dont rip the box.
But they may say no and you will have to use some other shipping box.

Its also recommended that you use our Apex Seals to take full advantage of the new surface finish.

Make sure to ask for all other rebuild parts that we always have in stock!
God BLess

t_g_farrell · 12-17-2010, 11:13 AM

Does any flaking on the edges disqualify a housing completely or is it a judgement call?

NoDOHC · 12-17-2010, 09:01 PM

What exactly can you get away with?

How deep of a groove, how bad of flaking, etc.

Judge Ito · 12-18-2010, 10:41 AM

Quote:

Originally Posted by NoDOHC

What exactly can you get away with?

How deep of a groove, how bad of flaking, etc.

http://rotarycarclub.com/rotary_foru...054#post135054

Rotary Inspired · 03-03-2011, 08:24 PM

I have nothing but great things to say about Jon and his service. Motor goes together tomorrow for the Texas Mile in March.

Thanks again Jon

sgt.stinkfist · 06-30-2011, 12:17 AM

i also would like to thank Jon. Goopy has the best customer service ive ever had, and i will continue to use goopy performance based on that alone, not to mention great parts

i just finished blasting the rest of my parts and motor should be together in a few weeks. i cant wait

12-06-2010, 10:03 PM	#1
GoopyPerformance Rotary parts manufacture Join Date: Sep 2010 Location: Stony point NY iTrader: (1) Posts: 170 Rep Power: 15	Goopy Performance Stony Point, NY Hello Stopping by to say hello to all Rotary engine enthusiast. We Manufacture, sell and build Rotary engine parts and accessories specializing in Big horspower drag and road racing applications. Parts available for 10A, 12A, 13B, 20B & Renesis. Racing Apex Seals Corner seals All springs All Gaskets Pulleys, New & used Rotor housings New & used Rotors Oversize main bolts Oil fill necks Vacume blocks Oil Blocks Pro-Jay intakes & throttle bodies Clutches Flanges Racing Spark plugs Clerancing kits Nitrous kits Etc etc... We also have repair services such as: Rotor housing re-surfacing/refreshing Semi-peripheral housings Semi-peripheral manifolds full peripheral housings 12 rotor housing milled from 13B Spun rotor bearing repair Lubricity Coatings Damaged rotor from apex seal of side seal repair Iron lapping Crankshaft repair Short Block Building Oversize bolt installed Flywheel repair and resurfacing FLywheel pinning (older engines) Media blasting Fabrication & maching These are some of our NO-NONSENSE customers.... http://www.goopyperformance.com/content/gallery See some of this months sales on WLG photo. http://wljphotography.com/index.html Se habla espanol! God Bless Goopy Performance Stony Point NY10980 845-947-0007 845-947-0047 fax Www.GoopyPerformance.com http://www.youtube.com/watch?v=jYemBRtGP9U Any questions? Last edited by ZGN; 12-31-2010 at 08:55 PM..

12-07-2010, 01:31 AM	#2
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	Welcome to the forum. Glad to have you guys on board! __________________ Kevin

12-07-2010, 12:27 PM	#3
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	Welcome to the forum! __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

12-07-2010, 09:56 PM	#4
GtoRx7 Rotary Fanatic Join Date: Jul 2008 iTrader: (0) Posts: 151 Rep Power: 17	I met and talked with Jack (Goopy owner) in person, as they came out and visited us at our shop. Very stand-up company! We were impressed with the products and already using the seals and other parts in recent engine builds. But hey Jack, dont forget to add us on Goopy retailers! __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp

12-08-2010, 02:27 PM	#5
Viperx7 Rotary Fanatic Join Date: Feb 2008 Location: Richmond, KY iTrader: (2) Posts: 322 Rep Power: 17	Welcome to the Club. __________________ Mike Chrisman 83 Rx7 Turbo 85 Rx7 GS 89 Rx7 GTU http://www.cardomain.com/ride/409797 "Don't apoligize for being Patriotic, F**k 'em. TK"

12-16-2010, 05:14 PM	#6
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC iTrader: (0) Posts: 757 Rep Power: 0	How much to resurface 12A housings? I saw Itos recommendation and am curious. __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

12-17-2010, 08:48 AM	#8
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	So just to clarify because it seems too good, it's $125 +shipping for TWO housings? Does this include 13B housings? __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

12-17-2010, 11:13 AM	#10
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC iTrader: (0) Posts: 757 Rep Power: 0	Does any flaking on the edges disqualify a housing completely or is it a judgement call? __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

12-17-2010, 09:01 PM	#11
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin iTrader: (1) Posts: 855 Rep Power: 17	What exactly can you get away with? How deep of a groove, how bad of flaking, etc. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

03-03-2011, 08:24 PM	#13
Rotary Inspired Rotary Fan in Training Join Date: Feb 2008 Location: SW OKC iTrader: (0) Posts: 75 Rep Power: 17	I have nothing but great things to say about Jon and his service. Motor goes together tomorrow for the Texas Mile in March. Thanks again Jon __________________ If you wanna become ASE certified buy the RX7.

06-30-2011, 12:17 AM	#14
sgt.stinkfist The Newbie Join Date: Jun 2011 iTrader: (0) Posts: 16 Rep Power: 0	i also would like to thank Jon. Goopy has the best customer service ive ever had, and i will continue to use goopy performance based on that alone, not to mention great parts i just finished blasting the rest of my parts and motor should be together in a few weeks. i cant wait __________________ 82 GS- GSL rearend, ported S4 13b, MSD 6AL, walbro 255, 460/550cc injectors, 2" dual exhaust, 3 row aluminum radiator w/ taurus E-fan 85 20v ST AE86 - sold to fund the 82 86 RX-7 GXL - donating parts to the 82 everything else - scrapped to fund the 82