Goopy Performance Stony Point, NY
 

Hello

Stopping by to say hello to all Rotary engine enthusiast.
We Manufacture, sell and build Rotary engine parts and accessories specializing in Big horspower drag and road racing applications.

Parts available for 10A, 12A, 13B, 20B & Renesis.
Racing Apex Seals
Corner seals
All springs
All Gaskets
Pulleys,
New & used Rotor housings
New & used Rotors
Oversize main bolts
Oil fill necks
Vacume blocks
Oil Blocks
Pro-Jay intakes & throttle bodies
Clutches
Flanges
Racing Spark plugs
Clerancing kits
Nitrous kits
Etc etc...

We also have repair services such as:

Rotor housing re-surfacing/refreshing
Semi-peripheral housings
Semi-peripheral manifolds
full peripheral housings
12 rotor housing milled from 13B
Spun rotor bearing repair
Lubricity Coatings
Damaged rotor from apex seal of side seal repair
Iron lapping
Crankshaft repair
Short Block Building
Oversize bolt installed
Flywheel repair and resurfacing
FLywheel pinning (older engines)
Media blasting
Fabrication & maching

These are some of our NO-NONSENSE customers....
http://www.goopyperformance.com/content/gallery

See some of this months sales on WLG photo.
http://wljphotography.com/index.html

Se habla espanol!

God Bless

Goopy Performance
Stony Point NY10980
845-947-0007
845-947-0047 fax
Www.GoopyPerformance.com


http://www.youtube.com/watch?v=jYemBRtGP9U
Any questions?

Welcome to the forum. Glad to have you guys on board!

Welcome to the forum!

I met and talked with Jack (Goopy owner) in person, as they came out and visited us at our shop. Very stand-up company! We were impressed with the products and already using the seals and other parts in recent engine builds. But hey Jack, dont forget to add us on Goopy retailers!

Welcome to the Club.

How much to resurface 12A housings? I saw Itos recommendation and am curious.

$125.00 per pair + shipping.

Please keep in mind that some housings are beyond repair with this method.
But our re-plating will be available by late 2011 So dont throw out any housings.

If you want us to validate a rotor housing prior to shipping it please email us a picture or two to info@goopyperformance.com and give us a little background on the housing ie: overheated, broken apex seal etc.

Innovation never stops..

Goopy Performance

So just to clarify because it seems too good, it's $125 +shipping for TWO housings? Does this include 13B housings?

The cost of 2 rotor housings are $125.00 not including shipping.
I have found that us postal will at times allow you to use the large flatrate box but you have to remove the manifold studs so they dont rip the box.
But they may say no and you will have to use some other shipping box.

Its also recommended that you use our Apex Seals to take full advantage of the new surface finish.

Make sure to ask for all other rebuild parts that we always have in stock!
God BLess

Does any flaking on the edges disqualify a housing completely or is it a judgement call?

What exactly can you get away with?

How deep of a groove, how bad of flaking, etc.

I have nothing but great things to say about Jon and his service. Motor goes together tomorrow for the Texas Mile in March.

Thanks again Jon

i also would like to thank Jon. Goopy has the best customer service ive ever had, and i will continue to use goopy performance based on that alone, not to mention great parts ;) i just finished blasting the rest of my parts and motor should be together in a few weeks. i cant wait :)