Norwegian S4 Base TII

Pettersen · 06-24-2011, 04:42 AM

Bought some stuff

, Rtek 2.1 and everything needed is on it's way, best i could afford right now.

Also i'm going to buy a used Garrett T66 AR.96 journal bearing and not watercooled, still it should perform better than the XSpower T70 AR1.05

Pettersen · 07-01-2011, 11:36 AM

Picked up the new turbo, a bit bigger than i first tought. Might need to go with 1600 sec and 720 pri...

Pettersen · 07-10-2011, 12:39 PM

was a bit messy in the garage before i began cleaning today.

Took of the old turbo and compared to the new one, should spool up earlier and deliver alot more air

A little thight, but ill manage to get atleast a little clearence to everything

Pettersen · 07-10-2011, 03:09 PM

Started figuring out how i want to mount my fmic, so stripped the front.

Shiny Greddy elbow

, ashame it makes the rest of the engine bay look like shit :/

Pettersen · 07-12-2011, 02:33 AM

Pettersen · 07-29-2011, 12:19 AM

New engine and transmission mounts, should be stiff enough

Pettersen · 10-24-2011, 02:50 PM

project changed direction, going to sell all the turbo stuff and build a NA engine instead.

Going to run a stock S4na engine while i build the other one.

My "new" S4 NA engine

Stripping off some parts

Went from distributor to CAS

Need to clean the engine bay, but that's not a priority right now.

06-24-2011, 04:42 AM	#1
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	Bought some stuff , Rtek 2.1 and everything needed is on it's way, best i could afford right now. Also i'm going to buy a used Garrett T66 AR.96 journal bearing and not watercooled, still it should perform better than the XSpower T70 AR1.05

07-01-2011, 11:36 AM	#2
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	Picked up the new turbo, a bit bigger than i first tought. Might need to go with 1600 sec and 720 pri...

07-10-2011, 12:39 PM	#3
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	was a bit messy in the garage before i began cleaning today. Took of the old turbo and compared to the new one, should spool up earlier and deliver alot more air A little thight, but ill manage to get atleast a little clearence to everything

07-10-2011, 03:09 PM	#4
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	Started figuring out how i want to mount my fmic, so stripped the front. Shiny Greddy elbow , ashame it makes the rest of the engine bay look like shit :/

07-12-2011, 02:33 AM	#5
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16

07-29-2011, 12:19 AM	#6
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	New engine and transmission mounts, should be stiff enough

10-24-2011, 02:50 PM	#7
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	project changed direction, going to sell all the turbo stuff and build a NA engine instead. Going to run a stock S4na engine while i build the other one. My "new" S4 NA engine Stripping off some parts Went from distributor to CAS Need to clean the engine bay, but that's not a priority right now.