1992 Miata, LS1, then LS3 swapped

mazpower · 06-02-2011, 12:12 PM

The rear end is done!

Front diff mount bracket

Adapter piece to go from 3 bolt flange to 4 bolt

New beefy driveshaft, good for 500 hp

New axles...thicker and heavier than stock. Good for 400 hp

Gotta do something with that fuel line...its not touching the driveshaft but its too close.

I drove the car last night for the first time since November. I'll get video later!

HickamHatch · 07-04-2011, 04:21 AM

Which haltech model are you running? I have platinum sport 2000 from
Old build and was hoping to use it on my ls1 but i see that the it only goes to 6 cyl direct fire. Please let me know how you set up your haltech and which model. Thanks!

just startn · 07-05-2011, 10:31 AM

Deff needs 2 turbos.

Force13b · 07-05-2011, 10:41 AM

Quote:

Originally Posted by just startn

Deff needs 2 turbos.

i'm not sure where they would fit.

djmtsu · 07-05-2011, 10:52 AM

Quote:

Originally Posted by Force13b

i'm not sure where they would fit.

Rear mount. Plenty of room where the muffler sits

mazpower · 07-05-2011, 10:52 AM

Quote:

Originally Posted by HickamHatch

Which haltech model are you running? I have platinum sport 2000 from
Old build and was hoping to use it on my ls1 but i see that the it only goes to 6 cyl direct fire. Please let me know how you set up your haltech and which model. Thanks!

I'm running a E11v2. You can run a LS1 no problem with a P2000S. You'll have to set it up to run sequential injection and waste spark ignition. Just pair the cylinders for waste spark (one on compression, other on exhaust stroke) and use the 4 ignition outputs. Make sure to use the earlier 24 tooth wheel, not the newer 50-something tooth wheel on your crank.

Quote:

Originally Posted by Force13b

i'm not sure where they would fit.

Yeah that would be interesting.

06-02-2011, 12:12 PM	#1
mazpower Rawr Bearclaw Join Date: Feb 2008 Location: The Souf Posts: 197 Rep Power: 18	The rear end is done! Front diff mount bracket Adapter piece to go from 3 bolt flange to 4 bolt New beefy driveshaft, good for 500 hp New axles...thicker and heavier than stock. Good for 400 hp Gotta do something with that fuel line...its not touching the driveshaft but its too close. I drove the car last night for the first time since November. I'll get video later! __________________ Illicit Performance Rotary building, porting, tuning, chassis dyno services www.illicitperformance.com

07-04-2011, 04:21 AM	#2
HickamHatch The Newbie Join Date: Jul 2011 Posts: 1 Rep Power: 0	Which haltech model are you running? I have platinum sport 2000 from Old build and was hoping to use it on my ls1 but i see that the it only goes to 6 cyl direct fire. Please let me know how you set up your haltech and which model. Thanks!

07-05-2011, 10:31 AM	#3
just startn Turbo Vert Join Date: Aug 2010 Location: Elyria Posts: 68 Rep Power: 15	Deff needs 2 turbos.