My ongoing project car

N.RotaryTech · 04-18-2011, 01:09 PM

Kind of tight on the passenger side of the engine bay, but this is how things look.

I drilled a hole next to the radiator. Blitz BOV I traded some parts for. Used some clear tubing I had around instead of normal vac tubing which I didn't have.

The sun was killing this shot, but shows the IC piping.

The Subaru Impreza intake pipe installed.

I used an S4 turbo MAF sensor, changed the connector wiring, and have a piece of filter clamped on.

View from above the turbo. One of the heat shields, Oil and coolant lines installed. Also one of my attempts to fix an exhaust leak. I still have a leak.

Oil feed line and source.

Oil return.

Oil temp source via T fitting.

04-18-2011, 01:09 PM	#11
N.RotaryTech Home-brew Rotary Join Date: Feb 2008 Location: GooseCreek SC Posts: 552 Rep Power: 18	Finished project. Kind of tight on the passenger side of the engine bay, but this is how things look. I drilled a hole next to the radiator. Blitz BOV I traded some parts for. Used some clear tubing I had around instead of normal vac tubing which I didn't have. The sun was killing this shot, but shows the IC piping. The Subaru Impreza intake pipe installed. I used an S4 turbo MAF sensor, changed the connector wiring, and have a piece of filter clamped on. View from above the turbo. One of the heat shields, Oil and coolant lines installed. Also one of my attempts to fix an exhaust leak. I still have a leak. Oil feed line and source. Oil return. Oil temp source via T fitting.