New Battery, No power to car

Garfinkles Motor Works · 03-11-2011, 01:28 AM

Check the battery again ,then clean and check the pos battery wire .Follow that wire to the small fuse box and check the rear most fuse 130 amp .You must remove the 10mmbolts on each side of it to remove it .Clean the neg battery post and wire ,follow it to the shock tower.Remove the bolt and clean the sheet metal and sandpaper the wire eyelet .Follow it on down to the motor and clean the eyelet,bolt,near starter, and motor area . Jack stands are a must if not a lift .be safe. Start no start let us know .

03-11-2011, 01:28 AM	#2
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Check the battery again ,then clean and check the pos battery wire .Follow that wire to the small fuse box and check the rear most fuse 130 amp .You must remove the 10mmbolts on each side of it to remove it .Clean the neg battery post and wire ,follow it to the shock tower.Remove the bolt and clean the sheet metal and sandpaper the wire eyelet .Follow it on down to the motor and clean the eyelet,bolt,near starter, and motor area . Jack stands are a must if not a lift .be safe. Start no start let us know .