Tranny, Clutch, Intake, Radiator,etc. for sale

Q@EPM · 03-01-2011, 09:26 PM

I have a few 1st Gen parts for sale. I had a project that we were going to use these for but the customer went with another car instead so I have these parts laying around taking up space at my shop.
First up is a Tranny that was rebuilt and has a few hundred miles on it, it is great condition. We bought it for this project but we never installed it. I also have the clutch that was used for this Tranny, also with just a few hundred miles on it as well, overall very good condition. Next is a Radiator with the with the twin Fans. I also have an Upper Intake that needs to go as well. And I also have a Alternator and Distributor and ECU for a 1st. gen. Take a look at the pictures, at this point these parts need to go so I will take any reasonable offers. If you have any questions just let me know.

QPYoung3@Gmail.com

mazdadude7 · 03-01-2011, 09:35 PM

how much u thinking for the tranny? im interested. got doc? what all is rebuilt? all new syncros? or just a few?....

chibikougan · 03-01-2011, 11:47 PM

Intake is for a GSL-SE 1st gen fuel injected.

project86 · 03-02-2011, 08:16 AM

^^ ya thats a gsl-se uim if i remember correctly. 1st gen 13b. Maybe it would be more beneficial to move this thread to 1st gen section?

***TitaniumTT*** · 03-02-2011, 04:47 PM

Yup, done, OP requested it as well

Q@EPM · 03-02-2011, 06:33 PM

Rims sold today, several other inquiries..thnxx, thread cleaned up with correct info on all parts. I also found a Water Pump cover for a 1st gen too...make me an offer these parts need to go !

Q@EPM · 03-05-2011, 04:58 AM

Someone out there must need these parts. They are just taking up room at my shop, I only have 1000 sq/ft and need every inch to do my Fab Work. Someone make me an offer on these parts. I know someone must need or want these good parts. Every and all offers will be considered. Get'em while you can before someone else does....

Q@EPM · 03-11-2011, 12:38 AM

Someone Must need some of this stuff. I will make you a great deal on any or all of these parts. They must go, which means great prices.....

03-01-2011, 09:26 PM	#1
Q@EPM The Newbie Join Date: May 2008 Location: Montevallo, Alabama iTrader: (0) Posts: 6 Rep Power: 0	Tranny, Clutch, Intake, Radiator,etc. for sale I have a few 1st Gen parts for sale. I had a project that we were going to use these for but the customer went with another car instead so I have these parts laying around taking up space at my shop. First up is a Tranny that was rebuilt and has a few hundred miles on it, it is great condition. We bought it for this project but we never installed it. I also have the clutch that was used for this Tranny, also with just a few hundred miles on it as well, overall very good condition. Next is a Radiator with the with the twin Fans. I also have an Upper Intake that needs to go as well. And I also have a Alternator and Distributor and ECU for a 1st. gen. Take a look at the pictures, at this point these parts need to go so I will take any reasonable offers. If you have any questions just let me know. QPYoung3@Gmail.com __________________ EPM Custom Fabrication 205-432-8082 QPYoung3@Gmail.com Last edited by Q@EPM; 03-02-2011 at 05:41 PM..

03-02-2011, 08:16 AM	#4
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN iTrader: (3) Posts: 1,377 Rep Power: 17	^^ ya thats a gsl-se uim if i remember correctly. 1st gen 13b. Maybe it would be more beneficial to move this thread to 1st gen section? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

03-02-2011, 04:47 PM	#5
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Yup, done, OP requested it as well __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-02-2011, 06:33 PM	#6
Q@EPM The Newbie Join Date: May 2008 Location: Montevallo, Alabama iTrader: (0) Posts: 6 Rep Power: 0	Rims sold today, several other inquiries..thnxx, thread cleaned up with correct info on all parts. I also found a Water Pump cover for a 1st gen too...make me an offer these parts need to go ! __________________ EPM Custom Fabrication 205-432-8082 QPYoung3@Gmail.com

03-05-2011, 04:58 AM	#7
Q@EPM The Newbie Join Date: May 2008 Location: Montevallo, Alabama iTrader: (0) Posts: 6 Rep Power: 0	Someone out there must need these parts. They are just taking up room at my shop, I only have 1000 sq/ft and need every inch to do my Fab Work. Someone make me an offer on these parts. I know someone must need or want these good parts. Every and all offers will be considered. Get'em while you can before someone else does.... __________________ EPM Custom Fabrication 205-432-8082 QPYoung3@Gmail.com

03-01-2011, 09:35 PM	#2
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC iTrader: (5) Posts: 410 Rep Power: 17	how much u thinking for the tranny? im interested. got doc? what all is rebuilt? all new syncros? or just a few?....

03-11-2011, 12:38 AM	#8
Q@EPM The Newbie Join Date: May 2008 Location: Montevallo, Alabama iTrader: (0) Posts: 6 Rep Power: 0	Someone Must need some of this stuff. I will make you a great deal on any or all of these parts. They must go, which means great prices..... __________________ EPM Custom Fabrication 205-432-8082 QPYoung3@Gmail.com